We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A spool of clear 16 AWG speaker wire with a red polarity stripe, 50 feet of 26-strand oxygen-free copper conductor

PISKEKAT

PISKEKAT 16 AWG 26-Strand OFC Speaker Wire 50 ft

SKU CH-6FFE-VZ0QT

Two-conductor 16 AWG speaker cable with 26 strands of 99.99 % oxygen-free copper per channel, UL Class 2 rated and sequentially marked every two feet across a 50 ft spool

  • TypeOther
  • Oxygen-free copper conductors deliver clean audio signals
  • 26-strand construction provides flexibility for easy routing
  • Red polarity stripe enables quick, accurate connections
  • UL listed and NEC 725 Class 2 rated for safe installations
  • 50-foot spool with sequential markings simplifies length management

16 AWG OFC Speaker Wire — 50 ft Spool

This 16 AWG speaker wire uses 26 strands of 99.99 % oxygen-free copper per conductor to deliver clean, undistorted audio signals. The flexible clear PVC jacket carries a red stripe for quick polarity identification during installation. It is UL listed and rated NEC 725 Class 2 for safe use in both home and commercial environments. Sequential markings every two feet simplify length management on the reel.

Before Wiring — Check Connector Compatibility

Verify that your speakers and amplifier accept bare wire, banana plugs, spade tips or bent pin connectors, as these are the termination styles supported by the cable. Ensure the 16 AWG gauge matches the impedance and run-length requirements of your audio system. Confirm that local building codes permit Class 2 wiring for the intended installation path. The spool provides 50 feet of cable; measure your runs to confirm coverage.

Thermals, Noise and Power Draw

Passive copper wiring generates no heat, produces no audible noise and draws no power of its own. The oxygen-free copper conductors maintain low resistance so amplifier power reaches the speakers efficiently. The PVC jacket insulates the conductors without adding thermal load to the system. Performance remains consistent across typical indoor temperature ranges.

Highlights

  • Oxygen-free copper conductors deliver clean audio signals
  • 26-strand construction provides flexibility for easy routing
  • Red polarity stripe enables quick, accurate connections
  • UL listed and NEC 725 Class 2 rated for safe installations
  • 50-foot spool with sequential markings simplifies length management

Specifications

TypeOther

Questions about this item

Does the 50 ft spool include connectors or do I need to buy banana plugs separately?

The spool supplies 50 ft of 16 AWG 26-strand OFC wire with a red-stripe polarity marker; connectors such as banana plugs, spade tips or bent pins are not included and must be purchased separately.

When should I choose this 16 AWG 26-strand version instead of a thicker or thinner gauge?

Choose the 16 AWG 26-strand OFC wire for typical home or commercial speaker runs up to 50 ft where flexibility and 99.99 % oxygen-free copper clarity are required.

What does the UL 725 Class 2 rating mean when the wire is installed in a real system?

The UL 725 Class 2 rating confirms the cable meets NEC safety requirements for in-wall and commercial installations, so it can be run inside walls or ceilings without additional conduit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.