We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel tilt TV wall mount, low-profile bracket with pull straps and anti-drop edges

Pipishell PIMTK1 Tilt TV Wall Mount 23-55" 99lbs VESA 400x400mm

SKU CH-EWDK-D92TK

A low-profile steel bracket holds 23-55 inch televisions up to 99 lbs on 100x100 to 400x400 VESA patterns with 0-8° tilt to reduce glare

  • Name23"-55" Tilt TV Wall Mount
  • Mount StyleWall Mount
  • ColorBlack
  • TV Size Capacity23"-55" Tilt TV Wall Mount
  • TV Weight Capacity99 pounds
  • Height3.8 in
  • Holds TVs 23 to 55 inches up to 99 lbs
  • 0 to 8° tilt cuts glare and eases neck strain
  • Low 1.3 inch profile keeps screen close to wall
  • Fits VESA patterns 100×100 mm to 400×400 mm
  • Mounts on 8 or 16 inch wood studs or concrete walls

Compatibility Range

This tilt wall mount fits most flat and curved TVs from 23 to 55 inches weighing up to 99 lbs. It supports VESA hole patterns from 100x100 mm to 400x400 mm. The bracket mounts on 8 or 16 inch wood studs as well as concrete and brick walls.

Sustained Performance

The steel construction holds the display 1.3 inches from the wall in a fixed low-profile position. An adjustable 0 to 8 degree downward tilt reduces glare and neck strain during extended viewing sessions. Integrated safety locks and anti-drop panel edges keep the television secure permanently.

Pre-Installation Checks

Verify your TV's VESA pattern falls between 100x100 mm and 400x400 mm and its weight does not exceed 99 lbs. Confirm the wall structure provides 8 or 16 inch wood stud spacing or solid concrete and brick. This mount must not be installed on drywall alone.

Highlights

  • Holds TVs 23 to 55 inches up to 99 lbs
  • 0 to 8° tilt cuts glare and eases neck strain
  • Low 1.3 inch profile keeps screen close to wall
  • Fits VESA patterns 100×100 mm to 400×400 mm
  • Mounts on 8 or 16 inch wood studs or concrete walls

Specifications

BrandPipishell
ModelPIMTK1
Name23"-55" Tilt TV Wall Mount
Mount StyleWall Mount
ColorBlack
TV Size Capacity23"-55" Tilt TV Wall Mount
TV Weight Capacity99 pounds
Height3.8 in
Width21.5 in
Weight1.161 kilograms

Questions about this item

Does the 1.3-inch low-profile design trap heat behind a 55-inch TV running all day?

The 1.3-inch standoff leaves a small airflow gap; most 23-55 inch TVs vent adequately at this distance, but check the TV manual for minimum rear clearance.

My wall has 16-inch wood studs — is the 21.5-inch wide plate enough to hit both studs?

Yes, the 21.5-inch wall plate spans standard 16-inch stud centres and includes lag bolts for secure mounting into wood studs.

Will the 400x400mm VESA limit stop me from using this mount with an older 32-inch set that has 100x100mm holes?

No, the bracket supports VESA patterns from 100x100mm up to 400x400mm, so the older 32-inch TV will fit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.