We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black 5.25 inch 3-way surface-mount car speakers with carbon-mica woofers, midrange drivers and piezo tweeters

Pioneer

Pioneer TS-X210 3-Way Car Speakers 5.25" 100W

SKU CH-W6WQ-B2Q42

Three-way 5.25" speakers handle 100 W peak with carbon-mica IMPP cone, 1-5/8" midrange and 3/4" piezoelectric tweeter

  • TypeSpeakers
  • Speaker Size5.25"
  • FeaturesMaximum power of 100W and nominal power of 25W
  • 100 W max power handles loud transients without distortion
  • 25 W RMS continuous rating matches typical head-unit output
  • 25" carbon-mica IMPP cone resists moisture and holds shape
  • 1-5/8" cellulose midrange plus 3/4" piezo tweeter covers 60 Hz to 30 kHz
  • 1 oz ferrite magnet keeps the driver light for surface mounting

Pioneer TS-X210 3-Way Car Speakers

The Pioneer TS-X210 is a 3-way surface-mount car speaker built for drivers who want clearer sound without replacing factory speaker locations. It uses a 5.25-inch carbon and mica reinforced IMPP cone woofer, a 1-5/8-inch cellulose fibre cone midrange and a 3/4-inch piezoelectric tweeter. The elastic polymer surround and rubber-coated cloth centre cap help the cone move cleanly at high output.

100W Max Power and 25W RMS Headroom

Continuous power handling sits at 25 watts RMS while peaks up to 100 watts are supported for short bursts. The frequency response spans 60 Hz to 30 kHz so bass fundamentals, vocal detail and treble extension are all covered. A ferrite magnet weighing 4.1 oz and a copper voice coil keep the motor responsive. The system runs out of headroom when sustained levels exceed the 25-watt nominal rating for long periods.

Upgrade From Factory Coaxial Speakers

These speakers replace basic single-cone or dual-cone factory units that lack a dedicated midrange and tweeter. The jump is worth it when you hear muddy dialogue, missing high-frequency detail or distortion at moderate volume. The 3-way design separates bass, midrange and treble to different drivers so each operates in its comfort zone. Buyers who want deep sub-bass below 60 Hz or power handling above 25 watts RMS will need larger woofers or an external amplifier and subwoofer.

Highlights

  • 100 W max power handles loud transients without distortion
  • 25 W RMS continuous rating matches typical head-unit output
  • 25" carbon-mica IMPP cone resists moisture and holds shape
  • 1-5/8" cellulose midrange plus 3/4" piezo tweeter covers 60 Hz to 30 kHz
  • 1 oz ferrite magnet keeps the driver light for surface mounting

Specifications

BrandPioneer
TypeSpeakers
Speaker Size5.25"
FeaturesMaximum power of 100W and nominal power of 25W

Questions about this item

Will the 5.25" woofers fit the factory speaker openings in my older vehicle?

The 5.25" (130 mm) woofer size matches many standard factory locations; verify your vehicle's cut-out diameter and mounting depth before installation.

How can I confirm the tweeter is producing the high frequencies up to 30 kHz after installation?

Play test tones or high-resolution audio tracks; the 3/4" piezoelectric tweeter should reproduce crisp detail up to 30 kHz without distortion at moderate volume.

Are mounting brackets, grilles and wiring harnesses included, or must I buy them separately?

The speakers ship as a pair with integrated grilles; mounting hardware and vehicle-specific wiring adapters are not included and must be sourced separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.