We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black 7/8-inch hard-dome tweeters with metal mesh grilles

Pioneer

Pioneer TS-T110 7/8" Hard-Dome Tweeter Pair

SKU CH-2YS8-PD4KG MPN TS-T110

Pair of 7/8″ PPTA hard-dome tweeters with strontium magnets and magnetic fluid, handling 40 W RMS and 120 W peak, covering 2.5 kHz to 30 kHz at 90 dB sensitivity.

  • TypeTweeter
  • Speaker SizeTweeter
  • Vehicle TypeAutomotive
  • ColorBlack
  • Peak Power120 Watts
  • RMS Power40 Watts
  • Crisp highs up to 30 kHz from 7/8" PPTA hard dome
  • 40 W RMS / 120 W peak handles demanding transients
  • 90 dB sensitivity extracts detail from modest power
  • Flexible flush or surface mounting fits diverse installs
  • In-line 7,000 Hz high-pass crossovers included for easy integration

7/8" PPTA Hard-Dome Tweeter Pair

These 7/8-inch PPTA hard-dome tweeters are sold as a matched pair for automotive component systems. Each unit handles 40 watts RMS and peaks at 120 watts, with a 90 dB sensitivity rating. The strontium magnet and magnetic fluid cooling support a 2.5 kHz to 30 kHz frequency response.

Suits component installs; not full-range

Builders adding dedicated high-frequency drivers to a multi-way front stage will use the included 7,000 Hz in-line crossovers and dual-mount hardware. Buyers needing a single full-range speaker for factory locations should look elsewhere, as these reproduce only the upper spectrum.

4 ohm impedance and 3/4" mounting depth

The 4 ohm nominal impedance matches most aftermarket crossovers and amplifier channels. A shallow 3/4-inch mounting depth allows flush or surface installation in tight door panels or dash locations where deeper tweeters will not fit.

Highlights

  • Crisp highs up to 30 kHz from 7/8" PPTA hard dome
  • 40 W RMS / 120 W peak handles demanding transients
  • 90 dB sensitivity extracts detail from modest power
  • Flexible flush or surface mounting fits diverse installs
  • In-line 7,000 Hz high-pass crossovers included for easy integration

Specifications

BrandPioneer
TypeTweeter
Speaker SizeTweeter
ModelTS-T110
Vehicle TypeAutomotive
ColorBlack
Peak Power120 Watts
RMS Power40 Watts
Sensitivity90dB (1w/1m)
Frequency Response2.5 kHz - 30 kHz
Impedance4 Ohm
Mounting Depth3/4"
Features7/8" PPTA Hard-Dome Tweeter with Strontium Magnet and Magnetic Fluid
Built-in Crossover (-6dB/oct. HPF)
Surface or Flush Mounting Capabilities
Shipping weight0.91 kg
Package size178 × 178 × 127 mm

Questions about this item

How do I confirm the TS-T110 tweeters are performing correctly after installation?

Play test tones between 2.5 kHz and 30 kHz; clean output at 90dB sensitivity with 40 watts RMS input indicates proper operation.

What mounting hardware comes with the TS-T110 pair and what must I supply?

Flush- and surface-mount hardware plus non-removable metal mesh grilles are included; you must provide speaker wire and a 4-ohm compatible amplifier.

Which Pioneer tweeter model suits a system crossing over at 7,000 Hz with 6dB/octave slope?

The TS-T110 includes in-line crossovers set at 7,000 Hz with a 6dB/octave high-pass, matching that requirement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.