We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 inch car subwoofer with silver stamped steel basket and dual voice coil terminals

Pioneer

Pioneer TS-D10D4 10" Dual 4 Ohm Car Subwoofer

SKU CH-CZZT-X4QJX

A 10-inch car subwoofer with dual 4-ohm voice coils handles 500 watts RMS and 1500 watts peak for deep bass down to 20 Hz

  • Dual 4-ohm coils enable flexible wiring options
  • 500 watts RMS delivers strong continuous bass output
  • Aramid-reinforced cone resists distortion at high excursion
  • Butyl rubber surround maintains control during heavy cone movement
  • Shallow 5.5-inch mounting depth fits tight enclosure spaces

Pioneer TS-D10D4 10" Subwoofer

This 10-inch car subwoofer uses dual 4-ohm voice coils to give installers wiring flexibility for mono or stereo amplifiers. It suits drivers who want strong low-frequency output without needing a massive enclosure. The design targets accurate bass reproduction for daily listening or competition setups. Buyers needing a single-coil model or a different impedance should look elsewhere.

Thermal and Power Performance

The subwoofer handles 500 watts RMS with 250 watts per coil and accepts 1500 watts peak power for dynamic transients. A 56.4 oz ferrite magnet structure helps dissipate heat during extended play. Sensitivity sits at 76 dB so the amplifier must supply adequate current for high output. The butyl rubber surround controls cone motion to reduce mechanical stress at high excursion.

Build Quality and Installation

An injection-molded polypropylene cone reinforced with Aramid fibers provides rigidity for precise piston motion. The stamped steel basket and ABS center cap resist vibration while keeping weight manageable. Mounting depth measures 5.5 inches so verify enclosure clearance before purchase. No grille is included so factor that into the final installation plan.

Highlights

  • Dual 4-ohm coils enable flexible wiring options
  • 500 watts RMS delivers strong continuous bass output
  • Aramid-reinforced cone resists distortion at high excursion
  • Butyl rubber surround maintains control during heavy cone movement
  • Shallow 5.5-inch mounting depth fits tight enclosure spaces

Specifications

BrandPioneer

Questions about this item

How do I wire the dual 4-ohm voice coils and what is the common mistake?

Wire both coils in parallel for a 2-ohm load or in series for an 8-ohm load; the common mistake is wiring only one coil, which halves power handling to 250 watts RMS.

What parts will need replacement over time?

The butyl rubber surround may dry out and crack after years of excursion, requiring a recone kit; the ferrite magnet and stamped steel basket are permanent.

At what point does the 500-watt RMS thermal limit appear during sustained use?

Continuous pink-noise or bass-heavy material at 500 watts RMS will heat the dual voice coils to their thermal ceiling, causing power compression before the 1500-watt peak rating is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.