We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of 6x9 component woofers with tweeters and mounting hardware

Pioneer

Pioneer 6" x 9" Component Car Speakers 450W Max 20mm Tweeter

SKU CH-30FV-ZNJE8

Component speaker system with 6" x 9" carbon- and mica-reinforced IMPP cones and 20 mm PI tweeters handling 450 W peak power

  • TypeComponent System
  • Speaker Size6" x 9"
  • 450 W max power handles demanding soundtracks
  • 100 W nominal rating delivers steady everyday volume
  • 20 mm PI tweeter reproduces crisp high frequencies
  • Carbon and mica reinforced IMPP cone resists distortion
  • Multi-fit brackets and 40 in tweeter leg simplify installation

What This Component System Delivers

The Pioneer component system pairs 6" x 9" woofers with 20mm PI tweeters for a two-way design. Carbon and mica reinforced IMPP cones handle 100 Watts nominal and 450 Watts max power. Universal woofer baskets widen fitment across many door cavities.

Power Handling And Wiring Limits

The 100 Watt nominal rating sets the continuous level the woofers can sustain without thermal stress. The 450 Watt peak figure is for short bursts only. Included wires provide an 11" input leg and a 40" tweeter leg with an integrated crossover, fixing the tweeter mounting distance.

Installation Steps And Common Issues

Multi-Fit brackets, flush rings, angled housings and factory brackets cover most mounting styles. Twenty-two screws, speed clips and foam discs are supplied for sealing. The fixed 40" tweeter lead may fall short in deep doors, and the 11" input leg can require extension to reach the amplifier.

Highlights

  • 450 W max power handles demanding soundtracks
  • 100 W nominal rating delivers steady everyday volume
  • 20 mm PI tweeter reproduces crisp high frequencies
  • Carbon and mica reinforced IMPP cone resists distortion
  • Multi-fit brackets and 40 in tweeter leg simplify installation

Specifications

TypeComponent System
Speaker Size6" x 9"

Questions about this item

Should I choose the 450 W max or 100 W nominal rating when matching an amplifier?

Match the amplifier to the 100 W nominal figure for clean everyday output; the 450 W max only describes short-term peak handling.

What does the 20 mm PI tweeter change compared with a smaller dome?

The larger 20 mm dome extends high-frequency dispersion and lowers the crossover point to the woofer for smoother vocal detail.

Does the integrated crossover on the 40 inch tweeter leg limit the usable frequency range?

The built-in crossover on the 40 inch output leg fixes the tweeter crossover point, so you cannot bi-amp or adjust the slope externally.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.