We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular probe body with BNC connector and two hook probes attached

Pintech

Pintech PT-8002 differential probe 25MHz 20X/200X 1400V BNC measurement tool

SKU CH-W3S3-VT5X6 MPN PT-8002

Measures differential signals up to 1400 V with 25 MHz bandwidth, 20X or 200X attenuation and 14 ns rise time

  • Size/Dimensions187*83*41 mm
  • Selling UnitEach
  • TypeElectrical Testing & Measuring
  • Accuracy±2%
  • Standards/CertificationsCE
  • 25 MHz bandwidth captures fast signals
  • 14 ns rise time resolves rapid edges
  • 20X and 200X attenuation ratios cover wide voltage ranges
  • BNC connector fits any oscilloscope input
  • ±2 % accuracy ensures reliable measurements

Differential probe for oscilloscope measurement

The Pintech PT-8002 is a differential probe designed to convert two-point signals into ground-referenced outputs for oscilloscopes and data acquisition equipment. It provides selectable attenuation ratios of 20X and 200X with a bandwidth of 25MHz. The probe handles differential input voltages up to 1400V peak-to-peak at the 200X setting and common-mode voltages up to 490V RMS. A BNC interface ensures compatibility with standard oscilloscope inputs.

Engineers testing motor drives

This probe suits engineers characterising motor circuits, power electronics and floating measurements where ground isolation is required. The 14ns rise time and ±2% accuracy support detailed waveform analysis up to 25MHz. Users needing bandwidth beyond 25MHz or attenuation settings other than 20X and 200X should select a different model. Applications demanding higher common-mode rejection at frequencies above 20kHz will also require alternative equipment.

25MHz bandwidth with 20X/200X attenuation

The single specification that determines suitability is the 25MHz bandwidth combined with the fixed 20X and 200X attenuation ratios. This defines the maximum signal frequency and the voltage scaling range available for measurement. The probe delivers 7V output into a 50kΩ load with CMRR exceeding 80dB at 50Hz and 60dB at 20kHz. Input impedance is 8MΩ//0.59pF differential and 4MΩ//1.18pF single-ended to ground.

Highlights

  • 25 MHz bandwidth captures fast signals
  • 14 ns rise time resolves rapid edges
  • 20X and 200X attenuation ratios cover wide voltage ranges
  • BNC connector fits any oscilloscope input
  • ±2 % accuracy ensures reliable measurements

Specifications

BrandPINTECH
ModelPT-8002
Size/Dimensions187*83*41 mm
Selling UnitEach
TypeElectrical Testing & Measuring
Accuracy±2%
Standards/CertificationsCE

Questions about this item

What comes in the box with the PT-8002 probe?

The package includes the PT-8002 differential probe, one adapter, two probe hooks and a manual.

Should I use the 20X or 200X attenuation setting for a 1400 V peak-to-peak signal?

Select the 200X setting; it accepts up to 1400 Vp-p and 700 V DC, while the 20X setting is limited to 140 Vp-p and 70 V DC.

What does the 25 MHz bandwidth mean when I connect the probe to an oscilloscope?

The probe passes signals from DC to 25 MHz with a 14 ns rise time, so pulses faster than 14 ns will appear slowed on the scope display.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.