We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent acrylic case for Raspberry Pi 4 with open GPIO and port access

Pimoroni

Pimoroni Pibow Coupé 4 Ninja Raspberry Pi 4 case

SKU CH-E0DY-3EJZM

A slim, transparent acrylic case that protects a Raspberry Pi 4 while keeping every port and the GPIO header accessible

  • Protects the Raspberry Pi 4 with five cast acrylic layers
  • Transparent top and base keep the board visible inside
  • Cut-out fits a 40 x 30 mm heatsink or Fan SHIM
  • Slim profile stays fully HAT-compatible
  • Laser-etched port labels and open GPIO leave every port accessible

Raspberry Pi 4 case with transparent layers

The Pimoroni Pibow Coupé 4 Ninja is a five-layer cast acrylic enclosure built exclusively for the Raspberry Pi 4. Transparent top and base panels keep the board visible while protecting it during hacking and tinkering sessions.

GPIO and port access with heatsink clearance

A laser-etched GPIO cut-out and labelled port openings leave every primary connection accessible, including the camera and display ports. The lid includes a cutout sized 40 by 30 millimetres for a heatsink or Fan SHIM.

Fully HAT-compatible slim profile

The super-slimline stack adds minimal bulk and works with standard standoffs, so any HAT can be mounted without interference. Part number 463 identifies this Ninja colour variant for the Raspberry Pi 4 only.

Highlights

  • Protects the Raspberry Pi 4 with five cast acrylic layers
  • Transparent top and base keep the board visible inside
  • Cut-out fits a 40 x 30 mm heatsink or Fan SHIM
  • Slim profile stays fully HAT-compatible
  • Laser-etched port labels and open GPIO leave every port accessible

Specifications

No published specifications for this item yet.

Questions about this item

Should I pick the Ninja version or the Red version?

Both share the same five-layer acrylic build and clear top and base; the difference is the colour of the middle layers, so choose the shade you prefer for your Pi 4.

Does the 40 × 30 mm heatsink cut-out leave enough room for a Fan SHIM?

The lid cut-out is sized for a 40 by 30 mm heatsink or a Fan SHIM, so either cooling option fits without modification.

Will the GPIO cut-out and port labels still work when a HAT is stacked on top?

The case is fully HAT-compatible; the GPIO cut-out and laser-etched labels remain accessible with a HAT fitted.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.