We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact silver stompbox with five knobs and footswitch

Pigtronix

Pigtronix Octava Analog Octave Fuzz guitar pedal

SKU CH-FCMN-Z81PF

An all-analog octave fuzz with low-pass filter, drive and blend controls for versatile tone shaping

  • All-analog octave-up and fuzz in one pedal
  • Blend knob mixes clean and octave signals
  • Low-pass filter shapes octave tracking across the neck
  • J-FET preamp drive adds warm front-end overdrive
  • Dedicated fuzz circuit delivers full-wave rectified distortion

Analog Octave Fuzz Pedal

The Pigtronix Octava is an all-analog guitar effects pedal that combines an octave-up frequency doubler with a fuzz circuit. A J-FET preamp stage provides a front-end drive section for warm overdrive tones. An onboard low-pass filter shapes the tracking of the octave effect across the fretboard.

For Players Seeking Vintage Octave Textures

This pedal suits guitarists who want singing octave-up leads and thick, full-wave rectified fuzz in a single unit. The blend control allows precise mixing of the clean signal with the octave effect. Players requiring polyphonic tracking, octave-down voices, or digital preset storage should consider other options.

All-Analog Signal Path with Low-Pass Filter

The defining specification is the fully analog circuit topology centred on a low-pass filter at the octave circuit input. This filter sets the cut-off frequency to stabilise tracking and eliminate glitching without touching the guitar's own tone controls. The analog architecture delivers the harmonic complexity and dynamic response that digital modelling cannot replicate.

Highlights

  • All-analog octave-up and fuzz in one pedal
  • Blend knob mixes clean and octave signals
  • Low-pass filter shapes octave tracking across the neck
  • J-FET preamp drive adds warm front-end overdrive
  • Dedicated fuzz circuit delivers full-wave rectified distortion

Specifications

No published specifications for this item yet.

Questions about this item

What power supply does the Pigtronix Octava need to run on a pedalboard?

The pedal requires a standard 9 V DC centre-negative power supply; most pedalboard power bricks or a dedicated wall wart will work.

How do I set up the Octava so the octave-up effect tracks cleanly across the neck?

Start with the Filter knob low, then raise it until the upper-register notes sound clear; the Blend knob then mixes that octave tone with your dry signal.

Which parts of the Octava are likely to need attention after extended use?

The footswitch and the five rotary potentiometers (Volume, Blend, Filter, Drive, Fuzz) are the mechanical components that can wear out over time.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.