We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White on-ear headphones with 45mm drivers and 3.5mm cable

PHILIPS WFL900/H headphones 45mm 80 ohm White

SKU CH-SQHV-RCYEN

Wired on-ear headphones with 45 mm drivers and 80 ohm impedance for studio monitoring

  • TypeOn-Ear
  • ColorWhite
  • Driver Unit45mm
  • Frequency Response5Hz-16KHz
  • Input Impedance80 ohms
  • Power Supplyfalse
  • Studio-grade clarity from 45 mm dynamic drivers
  • 80 ohm impedance suits professional audio interfaces
  • Passive noise isolation keeps focus on the mix
  • Wired 3.5 mm connection ensures zero-latency monitoring
  • Over-ear comfort supports long recording sessions

PHILIPS WFL900/H 45 mm studio headphones

These on-ear headphones use 45 mm dynamic drivers and an 80 ohm input impedance. They are built for studio monitoring, mixing and DJ work where accurate sound reproduction matters. The closed-back design adds passive noise isolation for focused listening sessions.

Wired 3.5 mm connection with 6.35 mm adapter

The cable terminates in a 3.5 mm plug and a 6.35 mm (1/4 inch) adapter is included. This analogue link needs no battery or wireless pairing and works with any device that has a matching socket. Audio quality depends on the source output stage and cable length.

Check your device has a 3.5 mm

Verify that your audio interface, mixer, controller or computer provides a standard headphone jack. The 80 ohm impedance may require more voltage than a phone or laptop can deliver for high volume. No inline microphone or remote functions are mentioned in the specifications.

Highlights

  • Studio-grade clarity from 45 mm dynamic drivers
  • 80 ohm impedance suits professional audio interfaces
  • Passive noise isolation keeps focus on the mix
  • Wired 3.5 mm connection ensures zero-latency monitoring
  • Over-ear comfort supports long recording sessions

Specifications

BrandPHILIPS
SeriesClassic Series
ModelWFL900/H
Part NumberPro-002-LB-CA
TypeOn-Ear
ColorWhite
Driver Unit45mm
Frequency Response5Hz-16KHz
Input Impedance80 ohms
Power Supplyfalse
Connector3.5mm
Ear CouplingEarbud
Noise CancellingPassive
Wireless TypeBluetooth
Microphone Signal to Noise Ratio(SNR)110 decibels
Microphone Sensitivity110 decibels
Featuressound_isolation, Media Control, touch, Wired, Over Ear, dynamic_driver, 32 ohm

Questions about this item

Should I choose the 45 mm or 50 mm driver version for studio monitoring?

The spec sheet lists a 45 mm driver; the 50 mm figure appears only in generic marketing text, so the 45 mm unit is the one you will receive.

What does the 80 ohm impedance mean when I plug these into my laptop?

At 80 ohms the headphones need more voltage than typical 32 ohm models, so a laptop headphone jack may not drive them to full volume without an external amplifier.

Does the 3.5 mm connector limit the 16 kHz top-end in any way?

The 3.5 mm plug carries the full 5 Hz–16 kHz range; the connector itself does not cap the frequency response.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.