We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Philips UHP 200-150W 1.0 P22 bare projector bulb

Philips

Philips UHP 200-150W 1.0 P22 DLP Replacement Lamp

SKU CH-01E7-R7P71

Genuine Philips UHP 200-150W 1.0 P22 bare bulb replaces lamps in Apollo, Sanyo and Sony projectors with over 2000 hours rated life

  • TypeProjector Lamps
  • Genuine Philips UHP bulb ensures perfect projector compatibility
  • 200-150W lamp wattage delivers outstanding brightness for clear images
  • Stable colour spectrum maintained throughout the bulb lifetime
  • Low-voltage UV-Enhancer ignition technology guarantees reliable system start-up
  • Rated lifetime over 2000 hours provides long-lasting projection performance

Genuine Philips UHP 200-150W bare bulb

This is a genuine Philips UHP 200-150W 1.0 P22 bare bulb manufactured to ISO9001 standards. It serves as a direct replacement lamp for DLP projectors from Apollo, Sanyo and Sony. The bulb delivers a rated lifetime exceeding 2000 hours. It is designed to fit and function perfectly in the listed compatible models.

Suits owners of listed Apollo Sanyo Sony projectors

This lamp suits owners of the Apollo PL9762, PL9784, Sanyo POA-LMP56, PLC-XU46 and Sony VPL-HS10, HS20, VW40, VW50, VW60, VW70, VW80, VW85, VW90ES, GH10, HW10, HW15, HW20, XL5300 models requiring a UHP 200-150W 1.0 P22 bulb. Buyers needing a higher wattage lamp or a different base type should look at alternative projector lamps.

Verify your projector model matches

Before ordering, confirm your projector model appears in the supported list including Apollo PL9762, PL9784, Sanyo POA-LMP56, 6103058801, PLC-XU46 and the Sony VPL and LMP series shown. Ensure the required lamp wattage is 200-150W and the bulb type is UHP 1.0 P22. Check that your projector housing accepts a bare bulb without an integrated cage.

Highlights

  • Genuine Philips UHP bulb ensures perfect projector compatibility
  • 200-150W lamp wattage delivers outstanding brightness for clear images
  • Stable colour spectrum maintained throughout the bulb lifetime
  • Low-voltage UV-Enhancer ignition technology guarantees reliable system start-up
  • Rated lifetime over 2000 hours provides long-lasting projection performance

Specifications

BrandPhilips
TypeProjector Lamps

Questions about this item

Which projector models accept this Philips UHP 200-150W 1.0 P22 lamp?

This lamp fits Apollo PL9762, PL9784, Sanyo POA-LMP56, PLC-XU46, Sony VPL-HS10, HS20, VW40, VW50, VW60, VW70, VW80, VW85, VW90ES, GH10, HW10, HW15, HW20, and XL5300 projectors.

Will the bare bulb work inside my existing lamp housing?

Yes, the Philips UHP 200-150W 1.0 P22 bare bulb is designed to be installed into the original lamp cage of the compatible projectors listed.

How can I verify the lamp is performing correctly after installation?

Reset the projector's lamp timer, then check for stable brightness, consistent colour, quiet ignition and no flicker during the first hours of use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.