We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Philips Sim2 HT3000 HOST DLP replacement lamp module bare bulb inside housing

Philips

Philips Sim2 HT3000 HOST DLP replacement lamp 200-150W 1.0 P22

SKU CH-BKG6-6XPMR

A DLP replacement lamp for the Sim2 HT3000 HOST projector, rated at 200-150W with a 1.0 P22 bulb type

  • TypeProject Lamp
  • Weight0.9900
  • Original replacement bulb for Sim2 HT3000 HOST projector
  • 200-150W 1.0 P22 lamp specification matches original
  • Bulb-only module weighs .9900 kg for easy handling
  • 180-day warranty included with new condition unit
  • Compatible with Sim2 HT3000 HOST model 3000

Sim2 HT3000 HOST compatible lamp

This replacement lamp fits the Sim2 HT3000 HOST projector and ships in new condition. It is supplied as a bulb-only module without a housing or cage. The unit weighs 0.9900 and carries a 180 day warranty from the supplier. It is intended for owners who need a direct lamp swap for this specific model.

200-150W P22 power range

The lamp operates across a 200 to 150 watt range with a 1.0 P22 designation. This dual-watt specification defines the electrical envelope the projector must support for proper ignition and stable output. Installers should verify that the host unit is rated for this exact power window before fitting the bulb. Projectors requiring a different wattage or lamp code will not accept this module.

Bulb-only form factor

The part is delivered as a bare bulb without an integrated housing or connector frame. This means the existing cage must be reused during installation, which adds a handling step compared with full-module replacements. Buyers who need a complete plug-and-play assembly should look for a housed version instead. The 1.0 P22 code confirms the bulb geometry for the HT3000 HOST light engine.

Highlights

  • Original replacement bulb for Sim2 HT3000 HOST projector
  • 200-150W 1.0 P22 lamp specification matches original
  • Bulb-only module weighs .9900 kg for easy handling
  • 180-day warranty included with new condition unit
  • Compatible with Sim2 HT3000 HOST model 3000

Specifications

BrandJaspertronics
ModelSim2-HT3000 HOST-Bulb
Part NumberSim2-HT3000 HOST-Bulb
TypeProject Lamp
Weight0.9900

Questions about this item

Should I choose the 200 W or 150 W setting for my Sim2 HT3000 HOST?

The lamp is rated 200-150 W; the projector selects the power level automatically, so no manual choice is required.

What does the 1.0 P22 code tell me about brightness in my HT3000 HOST?

1.0 P22 is the lamp type identifier used by the projector; actual lumen output depends on the HT3000 HOST optical engine, not the code itself.

Does the P22 interface limit compatibility to certain Sim2 models?

The P22 designation matches the original HT3000 HOST lamp housing, so it fits that model without adapters.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.