Philips
Philips SHP9600 Over-Ear Open-Back Headphones Black
Open-back over-ear headphones with 50 mm neodymium drivers, 12–35,000 Hz response, 32 Ohm impedance, detachable 3 m cable and 3.5 mm gold-plated jack plus 6.3 mm adapter
- TypeOver Ear Headphones
- ColorBlack
- Driver Unit50MM
- Frequency Response12 - 35,000 Hz
- THD<0.1% THD
- Input Impedance32 Ohm
- Open-back design creates spacious soundstage for immersive home listening
- 50 mm neodymium drivers deliver crisp bass, balanced midrange, pristine highs
- Double-layered headband cushion with breathable ear cups ensures long-session comfort
- 3 m detachable cable with gold-plated 3.5 mm jack and 6.3 mm adapter
- 32 Ohm impedance and 101 dB sensitivity suit portable devices and headphone amps
Open-back headphones for home listening
The Philips SHP9600 are wired over-ear headphones with an open acoustic system. They use 50 mm neodymium drivers tuned for a frequency response of 12 to 35,000 Hz. The design targets listeners who want spacious sound at home rather than portable isolation.
Passive cooling and low power needs
With no active electronics the headphones produce no fan noise and draw only the signal power from the source. Maximum power handling is 200 mW at 32 Ohm impedance and 101 dB sensitivity. The lightweight 1.50 kg build and breathable ear-cup cushions keep heat buildup minimal during long sessions.
32 Ohm impedance suits most sources
The 32 Ohm load works directly with phones, laptops and dedicated headphone amplifiers alike. A 3 metre detachable cable with gold-plated 3.5 mm plugs is included, plus a 6.3 mm adapter for studio gear. Buyers needing wireless convenience or closed-back isolation should look elsewhere.
Highlights
- Open-back design creates spacious soundstage for immersive home listening
- 50 mm neodymium drivers deliver crisp bass, balanced midrange, pristine highs
- Double-layered headband cushion with breathable ear cups ensures long-session comfort
- 3 m detachable cable with gold-plated 3.5 mm jack and 6.3 mm adapter
- 32 Ohm impedance and 101 dB sensitivity suit portable devices and headphone amps
Specifications
| Brand | PHILIPS |
|---|---|
| Model | SHP960 |
| Type | Over Ear Headphones |
| Color | Black |
| Driver Unit | 50MM |
| Frequency Response | 12 - 35,000 Hz |
| THD | <0.1% THD |
| Input Impedance | 32 Ohm |
| Power Supply | 200 mW maximum |
| Sensitivity | 200 mW maximum |
| Connector | 3.5mm gold-plated jacks on the 3 meters long detachable cable. (1/4 inch to 3.5mm adapter included) |
| Ear Coupling | Binaural |
| Cord Length | 3 Meters Long |
| Weight | 1.50 |
| Wireless Type | Wired |
| Compatibility | Universal |
| Features | Double-layered Headband Cushion, Gold-plated 6.3-3.5 mm jack adapter, 50 mm, Adjustable Headband, Call functions, Detachable Cable, Open Back |
Questions about this item
How do I install the 3 m detachable cable and avoid the loose-fit mistake?
Plug the 3.5 mm gold-plated jack firmly into the left ear-cup until it clicks, then connect the other end to your source; the step people miss is not pushing the connector in far enough to latch.
Which parts of the SHP9600 will need replacement after long-term use?
The breathable ear-cup cushions and double-layered headband cushion are the wear items; the steel-reinforced headband and detachable cable are built to last.
At what volume level does the 32 Ω, 101 dB sensitivity design hit its 200 mW power limit first?
Sustained peaks above roughly 200 mW into the 32 Ω load will trigger the thermal limit, so very loud passages on a powerful amp reach that ceiling before distortion becomes audible.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sony ZX Series MDR-ZX110AP Wired On-Ear Headphones White 30mm 3.5mm
- Headphone
usbroway 10-pack VHF Antenna 136-174MHz for Motorola HT1000 MTS2000 XTS2500 XTS3000 XTS3500
- Two-way Radio



