Philips
Philips MSR Gold 700/2 MiniFastFit DLP Replacement Lamp Clay Paky Alpha Wash 700 Grand
High-output 700 W entertainment lamp delivers 46,000 lumens at 7500 K with CRI 73 and FastFit design for quick replacement
- TypeProject Lamp
- Weight0.0520
- Delivers 46000 lumens for intense stage brightness
- 7500K color temperature gives clean white light
- CRI 73 supports accurate on-stage color rendering
- 750-hour rated life reduces replacement frequency
- FastFit design enables quick lamp changes
Philips MSR Gold 700/2 MiniFastFit Lamp
This Philips MSR Gold 700/2 MiniFastFit lamp is a 700W AC entertainment light source built for touring, stage, studio, and event fixtures using the PGJX50 base. It delivers 46000 lumens at 7500K with CRI 73 for strong on-stage rendering. The FastFit design enables quick replacement when every minute matters during live production.
Thermals, noise and power draw
Gold-plated caps provide superior heat protection to help reduce premature failure under continuous high-temperature operation. P3 technology supports universal operating position and higher temperature running while maintaining consistent output over the lamp life. Nominal lamp current is 10.2A at 700W during dimmable operation.
Replaces worn PGJX50 700W lamps
This unit replaces exhausted PGJX50-based 700W entertainment lamps in compatible moving-head fixtures such as the Clay Paky Alpha Wash 700 Grand. The jump is worth it when output has dropped toward the 750-hour rated life at 50% failures and colour consistency has drifted. It is not for fixtures requiring a different base, wattage, or non-dimmable operation.
Highlights
- Delivers 46000 lumens for intense stage brightness
- 7500K color temperature gives clean white light
- CRI 73 supports accurate on-stage color rendering
- 750-hour rated life reduces replacement frequency
- FastFit design enables quick lamp changes
Specifications
| Brand | Jaspertronics |
|---|---|
| Model | Clay Paky Alpha Wash 700 Grand-LAMP |
| Part Number | Clay Paky Alpha Wash 700 Grand-LAMP |
| Type | Project Lamp |
| Weight | 0.0520 |
Questions about this item
How do I install the PGJX50 base lamp, and what step do people often get wrong?
Align the PGJX50 cap-base pins with the fixture socket and press firmly until the FastFit mechanism clicks; the common mistake is not fully seating the lamp, which breaks electrical contact and causes premature failure.
What maintenance or replacement will this 700W lamp need later?
Replace the lamp after roughly 750 hours of use when output drops to 50 percent; no other user-serviceable parts exist, so plan a full lamp swap at that interval.
What limit shows up first under sustained use of this 46000 lumen lamp?
The 750-hour rated life to 50 percent failures is the first hard limit; P3 technology allows universal positioning and higher temperatures, but the lamp will still reach end-of-life at that hour mark.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



