We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Philips MSR Gold 700/2 FastFit projector lamp with ceramic base and quartz envelope

Philips

Philips MSR Gold 700/2 FastFit Lamp for YW-LIGHT Color Beam 700

SKU CH-ZRK5-FD36F

A 700 W MSR Gold FastFit replacement lamp delivering 50000 lm nominal output at 7500 K for the YW-LIGHT Color Beam 700 projector

  • TypeProject Lamp
  • Weight0.1000
  • Bright output with 50000 lm nominal initial lumen
  • Efficient performance at 71 lm/W luminous efficacy
  • Accurate colour rendering from CRI 75 and 7500 K CCT
  • Reliable ignition down to 198 V minimum supply voltage
  • FastFit design enables quick lamp replacement

Philips MSR Gold 700/2 FastFit Lamp

This 700 W discharge lamp is designed as a direct replacement for the YW-LIGHT Color Beam 700 moving-head fixture. It delivers a nominal output of 50000 lm at a correlated colour temperature of 7500 K with a colour rendering index of 75. The FastFit base allows tool-free installation during service intervals.

Replaces worn MSR Gold 700 lamps

When an existing lamp reaches its rated life the output drops below 41800 lm and colour stability drifts, so a swap restores full brightness and the nominal 7500 K white point. The upgrade is worth it whenever a show requires consistent photometric performance across multiple fixtures.

Suits rental houses and venues running YW-LIGHT

Buyers needing a different wattage, base type or colour temperature should look elsewhere, as this lamp is matched to the 700 W 10.2 A electrical profile and FastFit mechanical interface of that specific fixture.

Highlights

  • Bright output with 50000 lm nominal initial lumen
  • Efficient performance at 71 lm/W luminous efficacy
  • Accurate colour rendering from CRI 75 and 7500 K CCT
  • Reliable ignition down to 198 V minimum supply voltage
  • FastFit design enables quick lamp replacement

Specifications

BrandJaspertronics
ModelYW-LIGHT Color Beam 700-LAMP
Part NumberYW-LIGHT Color Beam 700-LAMP
TypeProject Lamp
Weight0.1000

Questions about this item

What are the ignition supply voltage and lamp current for the MSR Gold 700/2 FastFit lamp?

The lamp requires a minimum ignition supply voltage of 198 V and operates at a nominal lamp current of 10.2 A.

How is the FastFit lamp installed in the YW-LIGHT Color Beam 700 fixture?

The FastFit design allows tool-free insertion; align the lamp base with the socket and press firmly until it clicks into place.

When should the lamp be replaced based on its rated specifications?

Replace the lamp when light output drops significantly from the nominal 50000 lm or after reaching the rated 700 W power limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.