We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Philips MSR Gold 700/2 FastFit projector lamp, compact silver housing with ceramic base

Philips

Philips MSR Gold 700/2 FastFit Lamp for D.T.S. Technobeam II Extreme

SKU CH-7PEP-QED00

Replacement lamp for D.T.S. Technobeam II Extreme projectors, rated at 700 W with 50000 lm nominal output and 7500 K colour temperature

  • TypeProject Lamp
  • Weight0.1000
  • Bright 50000 lm output for large venues
  • 71 lm/W efficacy reduces power draw
  • 7500 K colour temperature suits stage use
  • FastFit design speeds up lamp changes
  • 700 W rating matches fixture requirements

Philips MSR Gold 700/2 FastFit Lamp

The Philips MSR Gold 700/2 FastFit Lamp is a 700 W metal-halide replacement lamp designed for the D.T.S. Technobeam II Extreme moving-head fixture. It delivers a nominal output of 50000 lm at a correlated colour temperature of 7500 K. Entertainment technicians and venue operators use it to restore full brightness and colour fidelity in automated luminaires. The FastFit base allows rapid lamp changes during maintenance windows.

Replaces worn MSR Gold 700/2 lamps

This lamp replaces an exhausted MSR Gold 700/2 module when output has fallen below the minimum 41800 lm threshold or when colour shift exceeds the nominal chromaticity coordinates of X 298 and Y 322. The upgrade is worth it when a show demands consistent 7500 K white light and a colour rendering index of 75 across the entire fixture fleet. Fixtures running at the rated 10.2 A lamp current benefit from the restored luminous efficacy of 71 lm/W.

FastFit base enables tool-free installation

The FastFit base enables tool-free installation by aligning the lamp pins and twisting to lock in seconds. Technicians must ensure the ignition supply voltage reaches at least 198 V and that the cooling system keeps bulb temperature below 950 °C and pinch temperature below 500 °C. Common issues arise when old lamps are handled before cooling or when the fixture's power supply cannot sustain the rated 700 W load.

Highlights

  • Bright 50000 lm output for large venues
  • 71 lm/W efficacy reduces power draw
  • 7500 K colour temperature suits stage use
  • FastFit design speeds up lamp changes
  • 700 W rating matches fixture requirements

Specifications

BrandJaspertronics
ModelD.T.S. TECHNOBEAM II EXTREME-LAMP
Part NumberD.T.S. TECHNOBEAM II EXTREME-LAMP
TypeProject Lamp
Weight0.1000

Questions about this item

Will the 700 W FastFit base align with the D.T.S. Technobeam II Extreme housing without adapters?

Yes, the FastFit base is made for the D.T.S. Technobeam II Extreme so it seats directly in the fixture.

The lamp runs at 10.2 A — does the ballast need a specific ignition voltage setting?

The ignition supply voltage minimum is 198 V; set the ballast to meet or exceed that value before striking.

With a 950 °C bulb temperature limit, how often should I inspect the cooling filters?

Check filters monthly and clean them whenever airflow feels reduced; overheating past 950 °C shortens the 700 W lamp life.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.