We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Philips MSR Gold 700/2 FastFit DLP replacement lamp module

Philips

Philips MSR Gold 700/2 FastFit DLP Replacement Lamp for D.T.S. XR 700

SKU CH-C7TG-6Z9VX

700 W DLP replacement lamp rated at 50000 nominal lumens with a 7500 K colour temperature

  • TypeProject Lamp
  • Weight0.1000
  • Bright projection with 50000 lm nominal output
  • Accurate colour reproduction at 7500 K colour temperature
  • Efficient operation at 71 lm/W luminous efficacy
  • Reliable ignition from 198 V minimum supply voltage
  • FastFit design for straightforward lamp replacement

Replacement Lamp for D.T.S. XR 700

The Philips MSR Gold 700/2 FastFit is a new DLP replacement lamp built specifically for the D.T.S. XR 700 projector. It restores original brightness and colour performance for venues that rely on consistent large-screen projection. Installation uses the FastFit system for a direct lamp swap without tools.

Sustained Output and Thermal Limits

The lamp delivers a nominal luminous flux of 50000 lm at 700 W rated power with a luminous efficacy of 71 lm/W. Chromaticity coordinates hold at x 298 and y 322 while the correlated colour temperature sits at 7500 K. Maximum bulb temperature reaches 950 C and pinch temperature 500 C, so the projector cooling must handle continuous high-heat operation.

Critical Compatibility Specification

This part is only compatible with the D.T.S. XR 700 projector; it will not fit other models or brands. Buyers needing a different lamp base, wattage or form factor must source the correct module for their specific hardware.

Highlights

  • Bright projection with 50000 lm nominal output
  • Accurate colour reproduction at 7500 K colour temperature
  • Efficient operation at 71 lm/W luminous efficacy
  • Reliable ignition from 198 V minimum supply voltage
  • FastFit design for straightforward lamp replacement

Specifications

BrandJaspertronics
ModelD.T.S. XR 700-LAMP
Part NumberD.T.S. XR 700-LAMP
TypeProject Lamp
Weight0.1000

Questions about this item

How much power does the 700 W MSR Gold lamp draw and what heat should I expect at the bulb and pinch after hours of use?

The lamp runs at 700 W with a nominal current of 10.2 A; bulb temperature can reach 950 °C and pinch temperature 500 °C.

What projector model and supply voltage does this FastFit lamp require to operate?

It is made for the D.T.S. XR 700 projector and needs a minimum ignition supply voltage of 198 V.

Will the 7500 K colour temperature and CRI 75 of this lamp match the older lamps I have been using in the same projector?

Yes, the lamp delivers a nominal 7500 K correlated colour temperature with a CRI of 75, matching the original specification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.