We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Philips MSR Gold 700/2 FastFit DLP replacement lamp, compact silver metal housing with ceramic base and two-pin connector

Philips

Philips MSR Gold 700/2 FastFit DLP Replacement Lamp for Coemar TECHNOBEAM II EXTREME

SKU CH-HW7P-1XJMV

Replacement DLP lamp rated at 700 W with 50000 lm nominal output and 7500 K colour temperature for the Coemar TECHNOBEAM II EXTREME

  • TypeProject Lamp
  • Weight0.1000
  • High 50000 lm output for bright projections
  • 7500 K colour temperature gives crisp white light
  • 71 lm/W efficacy reduces running costs
  • CRI 75 ensures accurate colour reproduction
  • FastFit design simplifies lamp replacement

Replacement Lamp for Coemar TECHNOBEAM II EXTREME

This Philips MSR Gold 700/2 FastFit lamp is a direct replacement for the Coemar TECHNOBEAM II EXTREME moving-light fixture. It is intended for lighting technicians and venue operators who need to restore full output on that specific model. The lamp is supplied new and ready for installation.

Upgrade from worn MSR Gold 700/2 lamps

Swapping out a lamp that has dropped below the rated 50000 lm nominal output or shifted from the 7500 K nominal colour temperature restores the fixture's original photometric performance. The change is worth it when the existing lamp shows reduced lumen maintenance, colour drift or unreliable ignition at the 198 V minimum supply voltage.

FastFit base eases installation

The FastFit base design allows tool-free lamp changes inside the TECHNOBEAM II EXTREME housing. Technicians must ensure the fixture is cold and the supply voltage meets the 198 V minimum before striking the lamp. Overheating the pinch seal above 500 C or the bulb above 950 C will shorten life, so verify airflow and ballast settings after replacement.

Highlights

  • High 50000 lm output for bright projections
  • 7500 K colour temperature gives crisp white light
  • 71 lm/W efficacy reduces running costs
  • CRI 75 ensures accurate colour reproduction
  • FastFit design simplifies lamp replacement

Specifications

BrandJaspertronics
ModelCoemar TECHNOBEAM II EXTREME-LAMP
Part NumberCoemar TECHNOBEAM II EXTREME-LAMP
TypeProject Lamp
Weight0.1000

Questions about this item

What are the lamp's power rating and current draw so I can confirm the fixture's power supply matches?

The lamp is rated at 700 W with a nominal current of 10.2 A, and it requires a minimum ignition supply voltage of 198 V.

Does the FastFit base let me swap the lamp without tools, and which orientation should the pins face?

The FastFit design allows tool-free replacement; align the two pins with the socket keyways and push firmly until the lamp seats with a click.

How many hours can I expect before the 75 CRI output drops and the lamp needs changing?

Philips does not publish a rated lifespan for this MSR Gold 700/2 lamp; monitor output and replace when brightness or colour fidelity falls below show requirements.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.