Philips
Philips JCR 150 W 15 V MR16 3100 K GZ6.35 halogen bulb
A 150 W, 15 V MR16 halogen bulb with a GZ6.35 base, 3100 K colour temperature and a CRI of 100, rated for 500 hours
- TypeHalogen Bulbs
- Wattage150
- Color Temperature3100K
- Color Rendering Index100
- Bright, accurate colour with a CRI of 100
- Warm 3100 K light suits display and accent use
- 150 W output at 15 V for strong illumination
- GZ6.35 two-pin base fits compatible MR16 fixtures
- Rated 500 hours of halogen service life
Philips 150 W Halogen Bulb
The Philips JCR halogen bulb operates at 150 watts and 15 volts with a GZ6.35 two-pin base. It produces a 3100 K colour temperature and a colour rendering index of 100 for accurate colour reproduction. It is suited for fixtures requiring an MR16 form factor.
Sustained Output and Lifetime
The bulb is rated for 500 hours of operation at its specified output. Light output and colour quality remain consistent throughout the rated lifespan. It is not designed for continuous duty cycles far beyond this rating without replacement.
Thermal and Power Characteristics
During normal use the lamp draws 150 W at 15 V, converting most input power into heat. The compact MR16 envelope reaches high surface temperatures quickly. Adequate fixture ventilation is required to manage thermal load.
Highlights
- Bright, accurate colour with a CRI of 100
- Warm 3100 K light suits display and accent use
- 150 W output at 15 V for strong illumination
- GZ6.35 two-pin base fits compatible MR16 fixtures
- Rated 500 hours of halogen service life
Specifications
| Brand | Philips |
|---|---|
| Type | Halogen Bulbs |
| Wattage | 150 |
| Color Temperature | 3100K |
| Color Rendering Index | 100 |
Questions about this item
How much heat does the 150 W halogen capsule produce when run continuously?
At 150 watts the lamp converts almost all input power into heat, so the fixture and surrounding area will become very hot during extended use.
What voltage supply and socket does the GZ6.35 base require?
The bulb needs a 15 V AC or DC source and a two-pin GZ6.35 socket with 6.35 mm pin spacing.
Can I use this 3100 K halogen lamp in a dimmer circuit designed for older incandescent spots?
Yes, the filament dims smoothly on leading-edge or trailing-edge dimmers rated for at least 150 W.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



