Philips
Philips CDM-TD 150W/830 RX7s double-ended metal halide bulb
Double-ended RX7s metal halide lamp delivers 12750 lumens at 3000K with a 16000-hour rated life
- TypeHigh Intensity Discharge
- Lumen Range12750
- Wattage150
- Color Temperature3000K
- Life Time Hours16000
- Color Rendering Index88
- 12,750 lumens deliver bright illumination
- 3000K warm white light enhances visual comfort
- 16,000-hour rated life reduces replacement frequency
- 88 CRI provides accurate colour rendering
- Double-ended RX7s base fits compatible fixtures
Philips CDM-TD 150W Metal Halide Lamp
This Philips CDM-TD 150W/830 RX7s double-ended metal halide bulb delivers 12750 lumens at a warm 3000K colour temperature. It operates on an ANSI C142/E ballast and has a rated life of 16000 hours. The compact 5.41 inch length and 0.86 inch diameter suit compatible enclosed fixtures.
Suits commercial or retail display lighting
Buyers requiring a single-ended base, a different colour temperature, or higher colour rendering than CRI 88 should look at other options. It is not for residential sockets without the correct ANSI C142/E ballast and fixture. The double-ended RX7s base limits direct replacement use.
Fits fixtures accepting RX7s double-ended lamps
Installation requires a compatible ballast and enclosed fixture rated for high intensity discharge lamps. Handle the quartz envelope with clean gloves to avoid contamination. Incorrect ballast matching or open-fixture use are the most common causes of premature failure.
Highlights
- 12,750 lumens deliver bright illumination
- 3000K warm white light enhances visual comfort
- 16,000-hour rated life reduces replacement frequency
- 88 CRI provides accurate colour rendering
- Double-ended RX7s base fits compatible fixtures
Specifications
| Brand | Philips |
|---|---|
| Type | High Intensity Discharge |
| Lumen Range | 12750 |
| Wattage | 150 |
| Color Temperature | 3000K |
| Life Time Hours | 16000 |
| Color Rendering Index | 88 |
Questions about this item
What ballast rating must the fixture provide for this 150W CDM-TD lamp to operate?
The lamp requires an ANSI C142/E ballast rated for 150W metal halide operation.
Will the RX7s base fit the ceramic sockets in my older 150W double-ended fixture?
Yes, the double-ended RX7s base with 22mm diameter matches standard ceramic sockets used for 150W CDM-TD lamps.
How can I confirm the bulb is delivering its rated 12750 lumen output after installation?
A warm-up period of several minutes followed by a lux-meter reading at the target distance should match the 12750 lumen specification at 3000K.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



