We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular electronic ballast with side wire leads

Philips

Philips Advance IOP-2P59-N 107W 2-Lamp Electronic Ballast

SKU CH-4NKJ-SK99X

Electronic ballast operates one or two T8 fluorescent lamps at 38 or 59 watts on 120 to 277 volt input

  • typeBallasts
  • Instant-start electronic ballast for fast lighting
  • Operates on 120 to 277 V AC supply
  • Runs one or two T8 fluorescent lamps
  • Supports 38 W and 59 W max lamp wattage
  • Starts reliably down to 32 °F minimum temperature

Advance IOP-2P59-N electronic ballast

This Philips Advance IOP-2P59-N electronic ballast operates one or two T8 fluorescent lamps at 120 to 277V AC. It delivers instant start performance with a maximum lamp load of 59 watts per bulb and a total input rating of 107 watts. The unit starts reliably down to 32 degrees Fahrenheit.

Installers wiring one or two T8 lamps

This ballast suits maintenance teams and contractors replacing instant-start ballasts in commercial fixtures that run one or two T8 lamps at 38 or 59 watts. It is not for installations that require dimming control, programmed rapid start, or support for T5 or T12 lamp types. Buyers needing multi-level light output should look at a different model.

107-watt input at 120 to 277V AC

The 107-watt input rating at the full 120 to 277V AC range is the key figure for circuit planning and fixture compatibility. It confirms the ballast can drive two 59-watt T8 lamps on a standard lighting circuit without exceeding the nameplate load. Verify the fixture label matches this wattage and voltage before installation.

Highlights

  • Instant-start electronic ballast for fast lighting
  • Operates on 120 to 277 V AC supply
  • Runs one or two T8 fluorescent lamps
  • Supports 38 W and 59 W max lamp wattage
  • Starts reliably down to 32 °F minimum temperature

Specifications

BrandADVANCE
typeBallasts

Questions about this item

What input voltage range does the IOP-2P59-N support?

The ballast operates on 120 to 277V AC, so it works on standard North American mains without a separate transformer.

How many T8 lamps can this ballast drive and at what wattages?

It supports one or two T8 lamps rated at 38 W or 59 W each, up to a total of 107 W.

What is the minimum starting temperature for reliable operation?

The ballast is rated to start at 32 degrees F, making it suitable for typical indoor environments.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.