Philips Advance ICN-2P32-N Electronic Ballast T8 120/277V 1-2 lamps

What this ballast does and who needs it

The Philips Advance ICN-2P32-N is an electronic ballast for T8 fluorescent lamps. It operates on input voltages from 120 to 277V AC and supports one or two bulbs rated at 17, 25, 28 or 32 watts. It uses an instant start method and has a minimum starting temperature of 0 degrees F. This unit suits maintenance teams and contractors servicing existing linear fluorescent fixtures in commercial or institutional buildings.

Voltage range and lamp limits define the install

The ballast accepts a wide 120 to 277V AC supply, so it works on standard North American branch circuits without a separate transformer. It will only drive T8 lamps within the listed wattages of 17, 25, 28 or 32 watts and cannot support more than two lamps. There is no dimming capability of any type, so it cannot be used with dimming controls or daylight harvesting systems. Buyers needing dimming, programmed start, or support for three or four lamps must select a different model.

Solid-state build with standard wiring access

As an electronic ballast, it runs cooler and quieter than magnetic predecessors and eliminates audible hum. The housing is designed for typical fixture enclosures and connects through standard lead wires for line voltage and lamp sockets. Instant start strikes lamps quickly but can reduce lamp life in frequent-switching applications such as occupancy-sensor zones. Installers should verify the fixture wiring diagram matches the one-to-two-lamp configuration before mounting.