We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bare DLP projector lamp bulb, no housing, Philips branding

Philips

Philips 9284-400-05390 E20.9 190W/160W 0.8 IC (II) AC bare dlp replacement lamp

SKU CH-3GHT-MGNS6

Bare 190W/160W DLP projector lamp with 0.8 IC (II) AC rating for housing reuse

  • TypeProject Lamp
  • Weight0.6000
  • Genuine Philips lamp restores original projector brightness
  • Dual 190W/160W modes adapt to usage needs
  • 8 IC rating ensures precise colour reproduction
  • Bare bulb design fits existing housing for easy install
  • 240-day warranty backs long-term reliability

Philips DLP bare lamp for compatible projectors

This bare replacement lamp carries the Philips 9284-400-05390 code and delivers 190W or 160W output with a 0.8 IC rating. It is intended for owners of compatible DLP projectors who need to refresh the light source while reusing their existing lamp housing. Installation requires careful handling of the bare bulb assembly.

Dual-wattage operation sustains brightness over

The lamp supports both 190W and 160W modes, allowing the projector to balance light output against thermal load during extended use. Running at the lower wattage reduces heat buildup and helps maintain consistent image quality through lengthy presentations or film marathons. Thermal stability is preserved by the 0.8 IC design under continuous operation.

Bare bulb design demands careful housing reuse

Weighing 0.6000 units, the lamp arrives without a frame so the original housing must be clean, undamaged and compatible with the E20.9 form factor. The AC bare configuration means connectors mate directly with the projector’s socket, eliminating extra cables but requiring precise alignment during installation. Users who cannot verify housing condition should seek a complete module instead.

Highlights

  • Genuine Philips lamp restores original projector brightness
  • Dual 190W/160W modes adapt to usage needs
  • 8 IC rating ensures precise colour reproduction
  • Bare bulb design fits existing housing for easy install
  • 240-day warranty backs long-term reliability

Specifications

BrandJaspertronics
Model9284-400-05390
Part Number9284-400-05390
TypeProject Lamp
Weight0.6000

Questions about this item

How much power does the 190W/160W E20.9 lamp draw during all-day use?

The lamp operates at 190 watts in high-brightness mode and 160 watts in eco mode, so continuous daily running will draw within that range depending on the projector setting chosen.

What existing hardware must I already have to install this bare E20.9 bulb?

You need the original lamp housing from your current projector; this bulb is supplied without a frame and must be fitted into that housing before installation.

Will the 0.8 IC (II) AC lamp work in an older projector that originally used the 9284-400-05390 module?

Yes, the bulb is built to the 9284-400-05390 specification, so it matches the electrical and optical requirements of projectors designed for that part number.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.