We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A bare DLP projector lamp module with a Philips bulb inside, silver metal housing and ceramic base

Philips

Philips 9281-356-05390 DLP Replacement Lamp

SKU CH-NAVP-BFGGT

Replaces the lamp in compatible DLP projectors and rear-projection TVs using part number 9281-356-05390

  • TypeProject Lamp
  • Weight0.9900
  • Compatible with Sony VPL and Sim2 Domino projectors
  • 200-150W Jaspertronics OEM bulb delivers reliable brightness
  • Lamp-only design keeps replacement cost lower
  • 180-day warranty included with new condition
  • Weighs 0.99 kg for easy handling

Compatible projector lamp module

This Jaspertronics OEM replacement lamp uses a Philips bulb inside and carries part number 9281-356-05390. It is sold as a bulb-only unit weighing 0.9900 and includes a 180 day warranty. The lamp is rated at 200-150W 1.0 P22 and is supplied new.

Fits listed Sony and Sim2 models

The lamp matches a long list of projector part codes including Sony VPL-HS10, VPL-HS20, VPL-VW40, VPL-VW50, VPL-VW60, VPL-VW70, VPL-VW80, VPL-VW85, VPL-VW90ES, VPL-GH10, VPL-HW10, VPL-HW15, VPL-HW20, KDS-R60XBR2, KDS-R70XBR2 and Sim2 Domino 80, Domino D75, Domino D80, Domino D80E, HT3000 HOST, HT3000E, HT380. Buyers with projectors not on this list should look elsewhere.

Bulb-only format requires existing housing

This product is a bare bulb without a cage or housing, so the original lamp housing must be reused during installation. If the housing is damaged or missing, this module will not fit and a complete lamp assembly is needed instead.

Highlights

  • Compatible with Sony VPL and Sim2 Domino projectors
  • 200-150W Jaspertronics OEM bulb delivers reliable brightness
  • Lamp-only design keeps replacement cost lower
  • 180-day warranty included with new condition
  • Weighs 0.99 kg for easy handling

Specifications

BrandJaspertronics
Model9281-356-05390
Part Number9281-356-05390
TypeProject Lamp
Weight0.9900

Questions about this item

How much power does the 200-150W 1.0 P22 lamp draw during extended daily use?

The lamp is rated 200-150W, so power draw will fall within that range depending on projector brightness settings.

Which projector models accept the 9281-356-05390 bulb-only module without a housing?

Compatible models include Sony VPL-VW40, VPL-VW50, VPL-VW60, VPL-VW70, VPL-VW80, VPL-VW85, VPL-VW90ES, VPL-HW10, VPL-HW15, VPL-HW20, VPL-HS10, VPL-HS20, VPL-GH10, Sanyo PLC-XU46, Sim2 Domino 80, D75, D80, D80E, HT3000 HOST, HT3000E, HT380, and Sony KDS-R60XBR2, KDS-R70XBR2 rear-projection TVs.

Will the 9281-356-05390 lamp work in an older Sony VPL-HS10 that still uses the original housing?

Yes, the bulb-only module matches the original 9281-356-05390 specification used in the VPL-HS10, so it fits the existing housing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.