We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Philips 9281-289-05390 bare DLP projector lamp module with metal housing and exposed UHP bulb

Philips

Philips 9281-289-05390 E21.9 330W/264W 1.3 AC Bare DLP Replacement Lamp

SKU CH-S5ED-JBMMS

Replacement DLP lamp with original OEM UHP bulb rated at 330W or 264W and 1.3 AC for compatible projectors

  • TypeProject Lamp
  • Weight0.9990
  • Original OEM UHP bulb delivers factory-grade brightness
  • 330W/264W dual-power rating matches projector specifications
  • Bare lamp design fits 1.3 AC housing without modification
  • Compatible with Optoma EP783, TX783 and Projection Design F80 series
  • 240-day warranty backs reliable long-term operation

Philips 9281-289-05390 DLP replacement lamp

This Philips 9281-289-05390 DLP replacement lamp uses a Jaspertronics OEM UHP bulb rated at 330W/264W with 1.3 AC. It is sold as a bare bulb only, weighing 0.9990 units, and carries a 240 day warranty. The part number 9281-289-05390 matches the original component for compatible projectors.

Suits owners of listed Projection Design

This lamp fits Projection Design Cineo 80, F80, F80 WUXGA, F82, F82 WUXGA, FR12 RLS and Optoma EP783, EP783S, TX783, BL-FP330A, BL-FU300A, BL-FP350A units. Buyers needing a complete housing assembly or a lamp for projectors not listed here should look elsewhere.

Bare bulb only — no housing included

The critical specification is that this product is a bare bulb only, supplied without a cage or housing. Installation requires transferring the bulb into the existing housing or purchasing a compatible housing separately. Verify that your projector service procedure allows bare bulb replacement before ordering.

Highlights

  • Original OEM UHP bulb delivers factory-grade brightness
  • 330W/264W dual-power rating matches projector specifications
  • Bare lamp design fits 1.3 AC housing without modification
  • Compatible with Optoma EP783, TX783 and Projection Design F80 series
  • 240-day warranty backs reliable long-term operation

Specifications

BrandJaspertronics
Model9281-289-05390
Part Number9281-289-05390
TypeProject Lamp
Weight0.9990

Questions about this item

What projector models accept the 9281-289-05390 lamp with 330W/264W power rating?

The lamp fits Projection Design Cineo 80, F80, F80 WUXGA, F82, F82 WUXGA, FR12 RLS, Optoma EP783, EP783S, TX783, BL-FP330A, BL-FU300A, BL-FP350A and SP.87F01GC01 models.

How do I install the bare bulb without a housing, and what step do people miss?

Remove the old lamp module, transfer the bare 1.3 AC bulb into the existing housing, secure the retaining screws, then reset the projector lamp timer through the menu; skipping the timer reset causes premature replacement warnings.

When should I replace the UHP bulb inside this 240-day warranty lamp?

Replace the Jaspertronics OEM UHP bulb when brightness drops noticeably or the projector indicates end of lamp life; the 240-day warranty covers premature failure under normal operating conditions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.