Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Philips
A 2000 W metal-halide lamp delivering 138000 initial lumens at 7500 K with a 750-hour life and PGJX50 FastFit base for entertainment fixtures
The Philips 245605 is a 2000W MSR Gold FastFit metal halide lamp built for entertainment lighting. It delivers a nominal output of 160000 lumens at a correlated colour temperature of 7500K with a colour rendering index of 85. The PGJX50 base allows universal operating position in compatible fixtures. Rated life to fifty percent failures is 750 hours.
This lamp suits lighting designers who need high-output white light with consistent colour quality for live events, theatre or television studios. The FastFit system enables rapid lamp changes without tools during tight changeovers. Buyers who require longer service intervals or lower power consumption should consider alternative lamp types. Fixtures must support the PGJX50 base and 2000W electrical rating.
The PGJX50 FastFit base reduces replacement time by eliminating screw or clip fasteners, allowing single-handed insertion and removal. The lamp is dimmable, giving operators continuous intensity control from full output down to minimum stable level. Maximum bulb temperature reaches 950°C and pinch temperature 500°C, so luminaire ventilation must handle these thermal loads. Ignition requires a minimum supply voltage of 198V.
| Brand | Philips |
|---|---|
| Model | 245605 |
| Part Number | 245605 |
| Type | High Intensity Discharge |
| Color | Assorted |
| Lumen Range | 138000 |
| Wattage | 2000W |
| Color Temperature | 7500K |
| Life Time Hours | 750 |
| Color Rendering Index | 88 |
The lamp uses a PGJX50 cap-base, so the fixture must accept a PGJX50 socket for a secure FastFit connection.
No, the lamp draws 15 A at 2000 W and requires a ballast and ignitor rated for 2000 W metal halide operation with at least 198 V ignition supply voltage.
Verify the lamp strikes reliably, reaches the nominal 7500 K color temperature, delivers approximately 160000 lm initial output and operates within the 950 °C bulb and 500 °C pinch temperature limits.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?