We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver handheld dynamic microphone with mesh grille, on/off switch, XLR connector, 16.4 ft cable, clip and storage bag

Phenyx Pro PM-25S Dynamic Vocal Microphone

SKU CH-459C-0BYT2

A cardioid dynamic vocal microphone with on/off switch, 16.4 ft XLR cable, clip and storage bag for stage, studio or karaoke use

  • ConnectorXLR
  • Optimized EQ curve delivers warm lows and bright highs for authentic vocal tone
  • Cardioid pattern with internal foam reduces ambient noise and plosives for clean capture
  • 50 dB sensitivity and 260 Ω impedance provide strong output with minimal gain
  • Onboard on/off switch enables instant muting during live breaks
  • 4 ft XLR cable with clip and bag included for immediate setup

Vocal Microphone with Cardioid Pattern

The Phenyx Pro PM-25S is a dynamic handheld microphone built for singers, speakers and karaoke users who need a wired XLR connection. Its cardioid polar pattern focuses on the voice while reducing background noise, and the integrated on/off switch allows instant muting during pauses.

XLR Interface Requires External Preamp

The microphone terminates in a male XLR connector and ships with a 16.4 ft cable, so it must be plugged into a mixer, audio interface or PA system that provides microphone preamplification. No USB output or phantom power option is present, limiting direct connection to computers without additional hardware.

Sensitivity of -50±2dB at 260 Ohms

With a rated sensitivity of -50±2dB and a low impedance of 260 ohms, the PM-25S delivers a strong signal that works well even with lower-gain preamps. Buyers whose equipment cannot supply sufficient gain for quieter microphones will benefit from this higher output level.

Highlights

  • Optimized EQ curve delivers warm lows and bright highs for authentic vocal tone
  • Cardioid pattern with internal foam reduces ambient noise and plosives for clean capture
  • 50 dB sensitivity and 260 Ω impedance provide strong output with minimal gain
  • Onboard on/off switch enables instant muting during live breaks
  • 4 ft XLR cable with clip and bag included for immediate setup

Specifications

BrandPhenyx Pro
Part NumberPM-25S
ConnectorXLR

Questions about this item

Is the PM-25S sold in any other configuration besides the one with the 16.4 ft XLR cable, clip and storage bag?

The supplier lists only the PM-25S package that includes the 16.4 ft XLR cable, mic clip and storage bag; no alternative bundles or standalone versions are mentioned.

What does the -50±2dB sensitivity and 260 ohm impedance mean for my mixer or interface gain settings?

The -50±2dB sensitivity and low 260 ohm impedance give a higher output signal, so you need less gain on your mixer or interface to reach a full, clear level.

What does the XLR connector require on the receiving device?

The XLR connector plugs into any standard three-pin XLR input found on mixers, audio interfaces and PA systems.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.