We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black solar charge controller with LCD screen and two USB ports, 170 by 92 by 45 mm

PFCTART

PFCTART 30A MPPT Solar Charge Controller 12V/24V LCD Dual USB

SKU CH-NWZC-0ZTQH

A 30A MPPT controller manages 12V or 24V off-grid solar systems with an LCD display, dual 5V/2A USB ports, IP44 protection and automatic battery-type detection

  • TypeSolar Panel Kits
  • Solar Panel KitsOff-Grid
  • Kit AccessoriesCharge Controller
  • Junction BoxIP67 rated
  • ConnectorsUSB
  • NOCT Optimum Operating Current (Imp)30A
  • 30 A MPPT maximises solar harvest
  • Auto 12 V / 24 V detection simplifies setup
  • Dual USB 5 V 2 A ports charge phones directly
  • LCD screen shows real-time charging data
  • IP44 rated enclosure resists dust and splashes

30A MPPT Solar Charge Controller 12V/24V

This 30A MPPT controller manages solar panels and batteries in 12V or 24V off-grid systems. An industrial microcontroller automates charging while the LCD screen shows real-time status and allows parameter changes. Dual USB ports supply 5V/2A each for phones or small devices. It suits cabins, RVs or remote setups needing regulated solar power.

Build integration with MPPT controller

The unit accepts up to 30V open-circuit voltage from panels and drops only 0.3V in the loop. Self-consumption is 10mA, preserving stored energy. IP44 protection and -4 to +122 °C operating range suit outdoor enclosures. It fits a 170×92×45 mm footprint and connects via standard terminals plus two USB-A outputs. Compatible battery types include Flooded, AGM, GEL, LifePO4, Lithium and user-defined profiles.

Upgrade path from basic PWM units

Replaces simple shunt or PWM regulators that waste panel current and lack multi-chemistry support. The MPPT topology extracts more power in low light or partial shade, and automatic 12V/24V detection removes manual jumper errors. The jump is worth it when panel voltage exceeds battery voltage by a wide margin or when lithium batteries demand precise voltage limits. Not suited for grid-tie installations or arrays exceeding 30V open-circuit.

Highlights

  • 30 A MPPT maximises solar harvest
  • Auto 12 V / 24 V detection simplifies setup
  • Dual USB 5 V 2 A ports charge phones directly
  • LCD screen shows real-time charging data
  • IP44 rated enclosure resists dust and splashes

Specifications

ModelMPPT Solar Panel Charge Controller
TypeSolar Panel Kits
Solar Panel KitsOff-Grid
Kit AccessoriesCharge Controller
Junction BoxIP67 rated
ConnectorsUSB
NOCT Optimum Operating Current (Imp)30A
Specifications12V/24V, LCD display
FeaturesFit for solar panel and solar battery

Questions about this item

What is the maximum PV open-circuit voltage the controller can handle before it limits input?

The controller accepts a maximum PV open-circuit voltage of 30V; exceeding this will cause the unit to limit or shut down input.

How much power does the controller itself draw and what is its operating temperature range when running continuously?

Self-consumption is 10mA and the operating temperature range is -4 to +122.

Which battery types and system voltages must the installer configure before the controller will operate?

It auto-detects 12V or 24V systems and supports User, Flooded, AGM, GEL, LifePO4 and Lithium battery types.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.