We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel full-motion TV wall mount with articulating arms, extends 19 inches, retracts to 2.4 inches

PERLESMITH PSMFK1 Full Motion TV Wall Mount 27-60 Inch VESA 400x400 77 lbs

SKU CH-64PN-6RVG9

Full-motion bracket for 27-60 inch TVs up to 77 lbs, tilts ±15°/-5°, swivels ±90°, extends to 19 inches and retracts to 2.4 inches

  • Name27" to 60"
  • Mount StyleWall Mount
  • ColorBlack
  • TV Size Capacity27" to 60"
  • Height13.15 in
  • Width9.49 in
  • Reduces glare with +15°/-5° tilt adjustment
  • Swivels ±90° for flexible viewing angles
  • Extends 19 inches from wall for comfort
  • Retracts to 2.4 inches for low-profile look
  • Arms 38% thicker pass 4× load test

Universal fit for 27 to 60 inch TVs

This full motion wall mount supports flat and curved screens from 27 to 60 inches with a weight limit of 77 lbs. It accepts VESA patterns from 75x75 mm up to 400x400 mm and features a perfect center design for balanced positioning. The single stud mounting system works with wood studs, concrete, and brick walls.

Check your wall and VESA pattern first

Verify that your TV's mounting holes measure between 75x75 mm and 400x400 mm horizontally and vertically. Confirm the screen weight does not exceed 77 lbs and the diagonal size falls within the 27 to 60 inch range. This mount must be secured to a wood stud, concrete, or brick wall; it cannot be installed on drywall alone or metal studs. Use a stud finder to locate the center of a wood stud before drilling.

Replaces fixed or limited tilt brackets

The articulating arms extend up to 19 inches from the wall and retract to 2.4 inches for a low profile. They swivel up to 90 degrees left or right and tilt +15 degrees to -5 degrees, with +/-3 degree post-install leveling. Arms are 38 percent thicker than standard designs and have passed a 4x load test. This mount is not for screens larger than 60 inches, heavier than 77 lbs, or VESA patterns exceeding 400x400 mm.

Highlights

  • Reduces glare with +15°/-5° tilt adjustment
  • Swivels ±90° for flexible viewing angles
  • Extends 19 inches from wall for comfort
  • Retracts to 2.4 inches for low-profile look
  • Arms 38% thicker pass 4× load test

Specifications

BrandPERLESMITH
ModelPSMFK1
Name27" to 60"
Mount StyleWall Mount
ColorBlack
TV Size Capacity27" to 60"
Height13.15 in
Width9.49 in
Weight2.558 kilograms

Questions about this item

What hardware comes in the box and is a stud finder or masonry bit something I need to supply myself?

The package includes the wall plate, articulating arm, TV brackets, standard wood-stud lag bolts, concrete anchors, spacers, washers and a bubble level; you must provide a stud finder, drill, appropriate drill bits for wood or masonry, a socket wrench and a second person to lift the TV.

How do I decide which VESA pattern and weight limit apply to my specific TV?

Measure the horizontal and vertical hole spacing on the back of your TV; if it falls between 75x75 mm and 400x400 mm and the TV weighs 77 lbs or less, this mount is compatible.

What does the 19-inch extension and 2.4-inch retraction mean for daily use in a living room?

The arm can pull the screen out 19 inches for side-angle viewing or cable access and push it back to 2.4 inches from the wall for a low-profile look when not in use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.