We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel full-motion TV wall mount with six articulating arms, wide wall plate and fold-flat design

Perlegear PGLF12 Full Motion TV Wall Mount 42-86" 132 lbs

SKU CH-MJ1C-CFNKQ

Full-motion wall bracket fits 42–86 inch TVs up to 132 lbs with VESA 200×100 to 600×400 mm, tilts +5°/-15°, swivels ±45°, extends 16.3 in and retracts to 2.9 in

  • NameFits 42-86" TVs / Max 16" Wood Stud
  • Mount StyleWall Mount
  • ColorBlack
  • TV Size CapacityFits 42-86" TVs / Max 16" Wood Stud
  • Height3.74 in
  • Width10.43 in
  • Fits 42-86" TVs with VESA 200×100 to 600×400mm
  • Holds up to 132 lbs on six steel arms
  • Extends 16.3" out and retracts to 2.9" from wall
  • Tilts +5°/-15° and swivels ±45° for glare-free viewing
  • Mounts on 12" or 16" wood studs, brick or concrete

TV size and weight capacity

The Perlegear PGLF12 full motion wall mount supports flat or curved televisions from 42 to 86 inches and up to 132 lbs. It fits VESA patterns between 200×100 mm and 600×400 mm. The bracket is designed for wood studs spaced 12 or 16 inches apart, as well as concrete and brick walls.

Extension range and articulation

The arm extends 16.3 inches from the wall for viewing and retracts to 2.9 inches for a low profile. Tilt adjusts +5°/-15° without tools to reduce glare, swivel reaches +/-45° to direct the screen, and +/-3° post-install leveling fine tunes alignment. The unit weighs 6.219 kilograms.

Included hardware and wall considerations

Anti-drop end caps and security locks help keep the television in place. The wider wall plate has openings that accommodate an electrical outlet behind the screen. Direct installation on 24 inch stud spacing, drywall alone, or metal studs is not supported; a separate extension bracket is required for 24 inch studs.

Highlights

  • Fits 42-86" TVs with VESA 200×100 to 600×400mm
  • Holds up to 132 lbs on six steel arms
  • Extends 16.3" out and retracts to 2.9" from wall
  • Tilts +5°/-15° and swivels ±45° for glare-free viewing
  • Mounts on 12" or 16" wood studs, brick or concrete

Specifications

BrandPerlegear
ModelPGLF12
NameFits 42-86" TVs / Max 16" Wood Stud
Mount StyleWall Mount
ColorBlack
TV Size CapacityFits 42-86" TVs / Max 16" Wood Stud
Height3.74 in
Width10.43 in
Weight6.219 kilograms

Questions about this item

How do I install this mount on 16-inch wood studs, and what step is often missed?

Mount the wall plate directly onto 16-inch wood studs using the supplied hardware. The step often missed is verifying stud centre-to-centre spacing with a stud finder before drilling.

What maintenance will the articulating arms need over time?

Periodically check and tighten the six arm pivot bolts, and re-verify the anti-drop end caps remain secure after repeated extension and retraction cycles.

At what extension does the mount reach its physical limit?

The arm extends a maximum of 16.3 inches from the wall; beyond that the mechanism stops and cannot extend further.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.