We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Perle SR-1000-SC2 media converter in DIN rail metal case

Perle

Perle SR-1000-SC2 Media Converter Mount

SKU CH-GMA7-DC7MQ

Mounts a Gigabit media converter that links RJ-45 copper up to 100 m and 1310 nm SC fibre up to 2 km with a 10 240-byte frame size

  • TypeData & Communication
  • SizeMaximum frame size of 10,240 bytes
  • Gigabit copper to 1310 nm fibre up to 2 km
  • RJ-45 port reaches 100 m over twisted pair
  • Extended multimode SC link spans 6562 ft
  • DIN-rail case fits industrial cabinets
  • Terminal-block power input for external supply

Industrial Gigabit Media Converter Mount

The Perle SR-1000-SC2 is a DIN rail mountable media converter designed for industrial networks. It bridges copper and fibre segments in harsh environments where standard switches cannot survive. Engineers specify it to extend Ethernet reach across factory floors or outdoor cabinets.

Copper Link Limited to 100 Metres

The RJ-45 port supports 1000BASE-T up to 100 m or 328 ft before signal degradation requires fibre conversion. Maximum frame size is capped at 10,240 bytes, so jumbo frames beyond that limit will be dropped. Power is supplied externally through a Combicon terminal block rather than an internal supply.

Single-Mode Fibre Reaches Two Kilometres

The SC connector operates at 1310 nm and delivers 1000BASE-LX connectivity over extended multimode fibre up to 2 km or 6562 ft. This single uplink distance determines whether the converter fits the planned cable run. No other interface or protocol is supported by this unit.

Highlights

  • Gigabit copper to 1310 nm fibre up to 2 km
  • RJ-45 port reaches 100 m over twisted pair
  • Extended multimode SC link spans 6562 ft
  • DIN-rail case fits industrial cabinets
  • Terminal-block power input for external supply

Specifications

BrandPERLE SYSTEMS
TypeData & Communication
SizeMaximum frame size of 10,240 bytes

Questions about this item

Should I choose the SC2 model or another variant for my 2 km fibre run?

The SC2 variant provides 1000BASE-LX at 1310 nm over extended multimode fibre with an SC connector, reaching 2 km / 6562 ft. Other variants use different connectors or wavelengths.

What does the 1000BASE-T to 1000BASE-LX conversion mean for my network speed?

It bridges a 1000BASE-T copper link of 100 m / 328 ft to a 1000BASE-LX fibre link of 2 km / 6562 ft, maintaining gigabit throughput across the longer distance.

What does the SC connector cap in practice?

The SC connector terminates the 1310 nm extended multimode fibre, limiting the fibre segment to 2 km / 6562 ft while the copper side remains capped at 100 m / 328 ft.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.