We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact DIN-rail media converter mount, metal finish, terminal block power connector

Perle

Perle SR-100-SC40D Media Converter Mount

SKU CH-HPVR-VAPWP

DIN-rail media converter linking 100Base-TX copper to 40 km single-strand fibre with 2048-byte frames

  • TypeData & Communication
  • SizeMaximum frame size of 2048 bytes
  • Fast Ethernet connectivity up to 100 Mbps
  • Single-strand fiber link reaches 40 km
  • 1550 nm TX and 1310 nm RX wavelengths
  • Maximum frame size of 2048 bytes supported
  • DIN rail case with terminal block power connector

Industrial Media Converter Mount

The Perle SR-100-SC40D is a DIN-rail media converter designed for industrial networks. It connects 100Base-TX copper to 100Base-BX single-strand fibre over 40 km. Operators needing long-distance Fast Ethernet links in harsh environments use this unit.

DIN Rail Installation Steps

The module clips onto standard DIN rail and uses a Combicon terminal block for external power. No rack brackets or special tools are required. Wiring errors on the terminal block are the most common issue during setup.

40 km Single-Strand Fibre Reach

The converter transmits at 1550 nm and receives at 1310 nm over one SC single-mode fibre up to 40 km. Maximum frame size is 2048 bytes. Buyers needing multimode fibre or shorter reach cannot use this model.

Highlights

  • Fast Ethernet connectivity up to 100 Mbps
  • Single-strand fiber link reaches 40 km
  • 1550 nm TX and 1310 nm RX wavelengths
  • Maximum frame size of 2048 bytes supported
  • DIN rail case with terminal block power connector

Specifications

BrandPERLE SYSTEMS
TypeData & Communication
SizeMaximum frame size of 2048 bytes

Questions about this item

How can I confirm the SR-100-SC40D is converting traffic correctly after installation?

Check that the link LEDs show active connections on both the RJ-45 and SC ports and that frames up to 2048 bytes pass without errors.

What comes with the SR-100-SC40D and what must I source separately?

The unit includes the media converter in a DIN rail case with a Combicon terminal block; you must supply external power and the single-mode SC fibre patch cord.

Which wavelength pairing should I choose for a 40 km single-strand link?

Select the 1550 nm TX / 1310 nm RX BX version to match the opposite end using 1310 nm TX / 1550 nm RX over one fibre strand.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.