We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal mounting bracket for Perle media converter, silver finish, screw holes visible

Perle

Perle SMI-1110-S2SC10 Media Converter Mount

SKU CH-919M-JCTK7

Mounts a managed Gigabit media converter with RJ-45 and single-mode SC fibre up to 10 km

  • TypeData & Communication
  • SizeMaximum frame size of 10,240 bytes -- Gigabit; Maximum frame
  • Managed 10/100/1000 copper-to-fiber conversion up to 10 km single-mode
  • Extends gigabit links 6.2 miles over 1310 nm single-mode fiber
  • Supports 550 m multimode reach with optional mode-conditioning cable
  • Handles jumbo frames to 10,240 bytes on gigabit and 2,048 bytes on fast ethernet
  • Includes USA power cord for immediate deployment

Perle SMI-1110-S2SC10 media converter mount

The Perle SMI-1110-S2SC10 mount secures a managed media and rate converter for network engineers extending copper links over fibre. It supports 10/100/1000BASE-T RJ-45 connections up to 100 m or 328 ft. The converter handles 1000BASE-LX/LH at 1310 nm on single-mode SC fibre up to 10 km or 6.2 miles, and multimode SC up to 550 m or 1804 ft. with an optional mode conditioning cable.

Sustained load behaviour

The converter processes maximum frame sizes of 10,240 bytes on Gigabit links and 2,048 bytes on Fast Ethernet without dropping throughput. Managed operation maintains consistent conversion between copper and fibre media during continuous traffic. The 10/100/1000Base-T interface auto-negotiates speed and duplex to match link conditions.

Installation and common issues

The unit ships with a USA power cord for direct mains connection. Mounting hardware secures the converter in a rack or on a surface. Installers must verify single-mode or multimode fibre type and order the mode conditioning cable separately for multimode runs. Mismatched fibre polarity or missing conditioning cable are the typical causes of link failure.

Highlights

  • Managed 10/100/1000 copper-to-fiber conversion up to 10 km single-mode
  • Extends gigabit links 6.2 miles over 1310 nm single-mode fiber
  • Supports 550 m multimode reach with optional mode-conditioning cable
  • Handles jumbo frames to 10,240 bytes on gigabit and 2,048 bytes on fast ethernet
  • Includes USA power cord for immediate deployment

Specifications

BrandPERLE SYSTEMS
TypeData & Communication
SizeMaximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet

Questions about this item

How much power does the SMI-1110-S2SC10 draw when running continuously?

The unit is a managed 10/100/1000Base-T media and rate converter that connects 10/100/1000BASE-T RJ-45 up to 100 m to 1000BASE-LX/LH 1310 nm single-mode SC up to 10 km, so power draw scales with link activity rather than a fixed maximum.

What cabling and patch cords must I already have to install this converter?

You need an RJ-45 patch cord for the copper side and an SC single-mode fibre patch cord for the 1310 nm uplink; multimode SC with a mode-conditioning cable is also supported for 550 m links.

Can the 10/100/1000BASE-T port auto-negotiate with my older 10 Mbps and 100 Mbps switches?

Yes, the RJ-45 port supports 10, 100 and 1000 Mbps operation and will negotiate down to legacy 10/100 equipment while the fibre side remains at 1000BASE-LX/LH.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.