We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Perle SMI-110-S2ST20 media converter mount, compact metal bracket, black finish

Perle

Perle SMI-110-S2ST20 Media Converter Mount

SKU CH-EAYB-2V1B9

Mounts a managed 10/100Base-TX to 100BASE-LX 1310 nm single-mode ST media converter with 20 km reach and 2048-byte maximum frame size

  • TypeData & Communication
  • SizeMaximum frame size of 2048 bytes
  • Converts 10/100BASE-TX to 100BASE-LX single mode fibre
  • Extends network reach up to 20 km over 1310 nm wavelength
  • RJ-45 copper port supports 100 m cable runs
  • Managed operation enables remote configuration and monitoring
  • Maximum frame size of 2048 bytes handles large packets

Perle SMI-110-S2ST20 Media Converter

The Perle SMI-110-S2ST20 is a managed media and rate converter designed for network administrators extending copper links over single-mode fibre. It converts 10/100BASE-TX signals at an RJ-45 port to 100BASE-LX 1310 nm light on an ST connector. The unit includes a USA power cord for immediate deployment.

20 km single-mode reach with 2048-byte frames

The converter transports Ethernet frames up to 2048 bytes across distances up to 20 km or 12.4 miles on single-mode fibre. On the copper side the RJ-45 link is limited to 100 m or 328 ft at 10/100 Mbps. Networks needing longer copper runs, multi-mode fibre, gigabit speeds or jumbo frames beyond 2048 bytes will require different hardware.

Rack or shelf mounting with managed operation

The SMI-110-S2ST20 fits into standard equipment racks or sits on a shelf, requiring only a nearby AC outlet for the supplied USA power cord. Its managed interface lets administrators monitor link status and configure settings remotely, freeing technicians from on-site visits for routine diagnostics. The ST connector mates with existing single-mode patch cords without adapters.

Highlights

  • Converts 10/100BASE-TX to 100BASE-LX single mode fibre
  • Extends network reach up to 20 km over 1310 nm wavelength
  • RJ-45 copper port supports 100 m cable runs
  • Managed operation enables remote configuration and monitoring
  • Maximum frame size of 2048 bytes handles large packets

Specifications

BrandPERLE SYSTEMS
TypeData & Communication
SizeMaximum frame size of 2048 bytes

Questions about this item

Will the 10/100BASE-TX RJ-45 port link with my older 10 Mbps equipment?

Yes, the converter supports 10/100BASE-TX so it will negotiate a 10 Mbps link with legacy devices over the RJ-45 connection.

How can I verify the SMI-110-S2ST20 is passing traffic correctly after installation?

Check the front-panel LEDs for link and activity on both the RJ-45 and ST ports; a steady link light and blinking activity light confirm the 100BASE-LX 1310 nm single-mode fibre is carrying frames up to 2048 bytes.

Does the package include the ST fibre patch cable or only the USA power cord?

The supplied contents are the media converter and a USA power cord; an ST-terminated single-mode patch cable for the 20 km link must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.