We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact silver metal network media converter with RJ45 ports and SFP slots

Perle

Perle S-1110DHP-DSFP 100W Hi-PoE Media Converter

SKU CH-8BTJ-8CJ89

A fiber media converter that delivers up to 100W Hi-PoE power to cameras, lighting and access points over copper while linking to fiber via SFP transceivers

  • Delivers up to 100W Hi-PoE power to PTZ cameras and wireless access points
  • Connects copper to fiber with single or dual RJ45 ports and empty SFP transceiver slots
  • Supports IEEE 802.3bt standard and backwards compatibility with 802.3af PoE and 802.3at PoE+
  • Compatible with pre-standard solutions including UPoE, 4PPoE, PoE++, UltraPoE and 4 Pair PoE
  • Powers one or two powered devices per converter using standard UTP cables

Product Identity

The Perle S-1110DHP-DSFP is a Hi-PoE media converter that bridges copper and fiber while delivering up to 100W of IEEE 802.3bt power. It targets installers who need to supply high-wattage PoE to remote devices such as PTZ cameras with heaters, LED lighting or 802.11ax/ac wireless access points over extended distances.

Capacity and Headroom

Each RJ45 port supports 10/100/1000Base-T and can power one or two powered devices simultaneously at up to 100W each. The unit handles legacy PoE and PoE+ gear through full backwards compatibility with 802.3af and 802.3at. It does not suit deployments that require more than two powered endpoints per converter or power levels beyond the 100W ceiling.

Interface Limits

Fiber connectivity relies on one or two empty transceiver slots accepting Perle, Cisco or other MSA-compliant modules, so reach and wavelength depend entirely on the chosen transceiver. Copper links are limited to 1000Base-T speeds and standard UTP cabling. The converter cannot operate without a suitable transceiver installed in the SFP port.

Highlights

  • Delivers up to 100W Hi-PoE power to PTZ cameras and wireless access points
  • Connects copper to fiber with single or dual RJ45 ports and empty SFP transceiver slots
  • Supports IEEE 802.3bt standard and backwards compatibility with 802.3af PoE and 802.3at PoE+
  • Compatible with pre-standard solutions including UPoE, 4PPoE, PoE++, UltraPoE and 4 Pair PoE
  • Powers one or two powered devices per converter using standard UTP cables

Specifications

No published specifications for this item yet.

Questions about this item

Will the 100W Hi-PoE output power my existing IEEE 802.3af and 802.3at PoE+ devices alongside newer 802.3bt gear?

Yes, the converter is fully backwards compatible with IEEE 802.3af PoE and IEEE 802.3at PoE+ standards, so legacy powered devices work alongside 802.3bt equipment.

How can I verify the link is operating at 10/100/1000Base-T after installation?

Check the port status LEDs on the RJ45 interfaces; they indicate link speed and activity for each copper connection.

Does the S-1110DHP-DSFP ship with SFP transceivers or must I source MSA-compliant modules separately?

The unit provides empty transceiver ports; SFP modules from Perle, Cisco or other MSA-compliant vendors must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.