We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Perle S-110-S1Sc40U media converter, compact metal chassis, SC fibre port, RJ-45 jack, US power cord

Perle

Perle S-110-S1Sc40U Media Converter Mount

SKU CH-6DFE-YKVMR

Mounts a 10/100Base-TX to 100Base-BX single-strand fibre media converter with SC connector and 40 km reach

  • TypeData & Communication
  • SizeMaximum frame size of 2048 bytes
  • Converts 10/100Base-TX to 100Base-BX single-strand fiber
  • Extends network reach up to 40 km over single-mode fiber
  • Uses 1310 nm TX and 1550 nm RX wavelengths
  • Supports maximum frame size of 2048 bytes
  • Includes USA power cord for immediate deployment

Single-Strand Fiber Mount

The Perle S-110-S1Sc40U mount secures a media converter that links 10/100Base-TX copper to 100Base-BX single-strand fibre. It is built for network technicians extending Ethernet beyond standard copper reach. The bracket fits the converter that transmits at 1310 nm and receives at 1550 nm over single-mode cable. Maximum frame size supported is 2048 bytes.

Copper-to-Fibre Upgrade

This mount replaces ad-hoc shelf placement when a 100 m copper segment must jump to a 40 km fibre link. The jump is worth it when distance exceeds 328 ft or when electrical isolation between sites is required. The converter handles rate conversion between 10 and 100 Mbps without manual configuration. It is not for installations needing multi-strand fibre or wavelengths other than 1310/1550 nm.

Rack-Ready Integration

The mount positions the converter in a standard equipment rack alongside patch panels and switches. It frees bench space and aligns the SC connector with existing single-mode patch cords. A USA power cord powers the attached unit directly. No additional transceivers or media modules are needed for the specified single-strand connection.

Highlights

  • Converts 10/100Base-TX to 100Base-BX single-strand fiber
  • Extends network reach up to 40 km over single-mode fiber
  • Uses 1310 nm TX and 1550 nm RX wavelengths
  • Supports maximum frame size of 2048 bytes
  • Includes USA power cord for immediate deployment

Specifications

BrandPERLE SYSTEMS
TypeData & Communication
SizeMaximum frame size of 2048 bytes

Questions about this item

What rack or shelf depth does the S-110-S1Sc40U mount require?

The unit is a compact media converter that sits on a desktop or shelf; no rack ears or mounting brackets are included, so only a flat surface with room for the power cord is needed.

How do I connect the single-strand SC fiber link on the S-110-S1Sc40U?

Insert the SC connector into the converter's fiber port — 1310 nm TX and 1550 nm RX wavelengths are fixed — then plug the RJ-45 copper side into the network; the step often missed is matching the TX/RX wavelengths at the far end.

When should the USA power cord on the S-110-S1Sc40U be replaced?

Replace the cord if the plug or insulation shows damage, or if the unit is moved to a region with a different mains socket type; the converter itself has no user-serviceable parts.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.