We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal bracket for Perle media converter module

Perle

Perle CM-110-S2LC40 Media Converter Mount

SKU CH-V6JY-FX43X

Mounts a managed 10/100Base-TX to 100Base-EX single-mode media converter with LC connector supporting 40 km range

  • TypeData & Communication
  • SizeMaximum frame size of 2048 bytes
  • Managed media converter with 40 km single-mode reach
  • 10/100Base-TX to 100Base-EX rate conversion included
  • RJ-45 copper port supports 100 m / 328 ft links
  • Operates at 1310 nm wavelength for long-distance fibre
  • Maximum frame size of 2048 bytes for managed traffic

Perle CM-110-S2LC40 Mount Purpose

The Perle CM-110-S2LC40 mount secures a managed media converter module for network operators extending copper links over single-mode fibre. It supports 10/100Base-TX to 100Base-EX conversion at 1310nm across distances up to 40 km or 24.9 miles.

Installation Notes

The module fits into a compatible Perle chassis and connects via RJ-45 and LC interfaces for managed or unmanaged operation. Ensure the chassis slot matches the module form factor and that fibre polarity is correct before applying power.

Pre-Order Checks

Verify your chassis accepts CM-110 series modules and provides the required management interface if remote configuration is needed. Confirm the link budget covers 40 km on single-mode fibre and that maximum frame size of 2048 bytes suits your traffic profile.

Highlights

  • Managed media converter with 40 km single-mode reach
  • 10/100Base-TX to 100Base-EX rate conversion included
  • RJ-45 copper port supports 100 m / 328 ft links
  • Operates at 1310 nm wavelength for long-distance fibre
  • Maximum frame size of 2048 bytes for managed traffic

Specifications

BrandPERLE SYSTEMS
TypeData & Communication
SizeMaximum frame size of 2048 bytes

Questions about this item

How can I confirm the CM-110-S2LC40 is converting 10/100Base-TX to 100Base-EX 1310nm single mode correctly after installation?

Check the module LEDs for link and activity on both the RJ-45 and LC ports. A steady link light on each side with blinking activity during traffic shows the 40 km single-mode fibre and 100 m copper segments are passing frames up to 2048 bytes.

What comes with the CM-110-S2LC40 and what must be sourced separately?

The module itself is supplied. You must provide a compatible chassis, LC single-mode patch cables for the 40 km fibre run, Cat5e or better copper cable for the 328 ft RJ-45 link, and a management station if you want managed operation.

Which version of the CM-110-S2LC40 should I choose for a 40 km single-mode fibre link?

The CM-110-S2LC40 is the only variant listed; it delivers 100Base-EX at 1310 nm over single-mode fibre up to 40 km (24.9 miles) with an LC connector and 10/100Base-TX copper up to 100 m.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.