Perle
Perle CM-110-S2LC20 Media Converter Mount
Mounts a managed 10/100Base-TX to 100Base-LX media converter module supporting 20 km single-mode fibre links
- TypeData & Communication
- SizeMaximum frame size of 2048 bytes
- Managed 10/100Base-TX to 100Base-LX conversion
- 1310 nm single-mode LC fibre up to 20 km
- RJ-45 copper link up to 100 m or 328 ft
- Maximum frame size of 2048 bytes supported
- Managed or unmanaged operation modes available
Perle CM-110-S2LC20 Media Converter Mount
The Perle CM-110-S2LC20 is a managed media and rate converter module designed for network administrators extending Ethernet links over fibre. It bridges 10/100Base-TX copper connections to 100Base-LX single-mode fibre using an LC interface.
Sustained load behaviour
The module handles a maximum frame size of 2048 bytes during continuous operation across the 20 km single-mode link. Managed or unmanaged modes allow consistent forwarding without burst-only limitations. The 1310 nm wavelength ensures stable long-distance transmission.
Pre-order checks
Verify your network uses 10/100Base-TX RJ-45 cabling within the 100 m copper reach and LC single-mode fibre patch cords for the 20 km segment. Confirm managed operation requires a compatible Perle chassis or standalone power source.
Highlights
- Managed 10/100Base-TX to 100Base-LX conversion
- 1310 nm single-mode LC fibre up to 20 km
- RJ-45 copper link up to 100 m or 328 ft
- Maximum frame size of 2048 bytes supported
- Managed or unmanaged operation modes available
Specifications
| Brand | PERLE SYSTEMS |
|---|---|
| Type | Data & Communication |
| Size | Maximum frame size of 2048 bytes |
Questions about this item
Does the CM-110-S2LC20 generate noticeable noise or heat when running continuously?
The module has no moving parts and operates silently, with heat output typical for a managed 10/100Base-TX converter handling 2048-byte frames.
What chassis or slot must I already own to install this converter module?
It requires a compatible Perle Media Converter chassis with an available module slot for managed or unmanaged operation.
Will this 100Base-LX 1310nm single-mode module link with my existing 10/100Base-TX copper equipment?
Yes, the RJ-45 port connects to 10/100Base-TX gear up to 100 m or 328 ft, while the LC fibre port reaches 20 km or 12.4 miles.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



