We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular metal network module with RJ-45 and SC fiber ports

Perle

Perle CM-110-S1SC20U Media Converter Mount

SKU CH-DQCQ-JHB3G

Mounts a managed 10/100Base-TX to 100Base-BX single-strand fiber media converter module with SC connector

  • TypeData & Communication
  • SizeMaximum frame size of 2048 bytes
  • Managed 10/100Base-TX to 100Base-BX fiber conversion
  • Single strand SC fiber up to 20 km range
  • 1310 nm TX and 1550 nm RX wavelengths
  • Maximum frame size of 2048 bytes supported
  • Managed or unmanaged operation modes available

Perle CM-110-S1SC20U Media Converter Mount

The Perle CM-110-S1SC20U is a managed media and rate converter module designed for network infrastructure. It converts 10/100Base-TX copper signals to 100Base-BX single strand fiber for extended reach. This unit suits IT professionals managing campus or enterprise LAN links. It supports managed or unmanaged operation modes for flexible deployment.

Verify copper distance

Confirm the existing copper run does not exceed 100 m or 328 ft before installation. Ensure the far-end equipment uses matching 1310 nm TX and 1550 nm RX wavelengths on single mode fiber. The SC connector type must match the patch panel or switch interface. Maximum frame size supported is 2048 bytes for traffic planning.

Single strand fiber reduces cabling bulk

The single strand SC design halves the fiber count compared to dual strand links, simplifying tray routing and patching. Managed operation allows remote configuration and monitoring without physical access to the module. The compact form factor fits standard Perle chassis slots for high-density racks. Rugged construction suits continuous operation in wiring closets.

Highlights

  • Managed 10/100Base-TX to 100Base-BX fiber conversion
  • Single strand SC fiber up to 20 km range
  • 1310 nm TX and 1550 nm RX wavelengths
  • Maximum frame size of 2048 bytes supported
  • Managed or unmanaged operation modes available

Specifications

BrandPERLE SYSTEMS
TypeData & Communication
SizeMaximum frame size of 2048 bytes

Questions about this item

What comes in the box and do I need to buy cables or transceivers separately?

The package contains the CM-110-S1SC20U media converter module. You supply the RJ-45 copper patch cord for the 100 m link and the single-mode SC fibre patch cord for the 20 km single-strand run.

How do I choose between managed and unmanaged operation on this model?

The CM-110-S1SC20U supports both modes. Use managed operation when you need remote configuration and monitoring via the management interface; use unmanaged mode for a simple plug-and-play link.

What does the 20 km single-strand fibre distance mean for a real installation?

It means the 1310 nm TX / 1550 nm RX optics can bridge up to 20 km (12.4 miles) over a single strand of single-mode fibre with an SC connector, while the copper side reaches 100 m (328 ft).

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.