We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Perle C-110 media converter module with RJ-45 and SC fiber ports

Perle

Perle C-110-S1SC40U Media Converter Mount

SKU CH-TAHM-VCRSP

A 10/100Base-TX to single-strand fibre media converter module with SC connector supporting 40 km reach

  • TypeData & Communication
  • SizeMaximum frame size of 2048 bytes
  • Converts copper to single-strand fibre up to 40 km
  • Extends 10/100 networks 24.9 miles over single-mode SC
  • TX 1310 nm and RX 1550 nm wavelengths for bidirectional traffic
  • Supports frames up to 2048 bytes for efficient data handling
  • Compact module mounts C-110 media converters in standard racks

Media Converter Mount for Single-Strand Fiber

The Perle C-110-S1SC40U mount secures a 10/100Base-TX media converter module that bridges copper and single-mode fiber networks. It is designed for installers who need a fixed position for the module in a rack or enclosure. Buyers who require a managed switch or a multi-port aggregation device will not find those functions here.

Maximum Frame Size 2048 Bytes

The module handles a maximum frame size of 2048 bytes, which determines whether jumbo frames or standard Ethernet frames pass through without fragmentation. This limit is the key specification for verifying compatibility with existing network traffic patterns. Networks that regularly transmit frames larger than this value will experience dropped packets or reduced throughput.

SC Connector and Single-Strand Wavelengths

The converter uses an SC connector with 1310 nm transmit and 1550 nm receive wavelengths over a single fiber strand, enabling 40 km reach. This single-strand design halves the fiber cabling required compared to dual-strand links. Installations that already use dual-fiber patch cords or LC connectors must adapt their cabling to match this interface.

Highlights

  • Converts copper to single-strand fibre up to 40 km
  • Extends 10/100 networks 24.9 miles over single-mode SC
  • TX 1310 nm and RX 1550 nm wavelengths for bidirectional traffic
  • Supports frames up to 2048 bytes for efficient data handling
  • Compact module mounts C-110 media converters in standard racks

Specifications

BrandPERLE SYSTEMS
TypeData & Communication
SizeMaximum frame size of 2048 bytes

Questions about this item

How does the 40 km single-mode fiber distance hold up once the module is installed in a live network?

The SC single-strand fiber link runs at 1310 nm TX and 1550 nm RX and is rated for 40 km or 24.9 miles on single-mode cable.

What does the 100Base-BX single-strand interface cap in real-world throughput?

It converts 10/100Base-TX copper at up to 100 m to a 100Base-BX single-strand fiber link, so the practical ceiling is 100 Mbps full duplex.

What physical space or mounting does the C-110-S1SC40U module need inside a chassis?

The module fits a Perle C-110 chassis slot and connects via RJ-45 for copper and SC for single-mode fiber.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.