We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Perle C-110-M2St2 media converter mount, compact metal bracket with screw holes

Perle

Perle C-110-M2St2 Media Converter Mount

SKU CH-T75N-HD6TS

Converts 10/100Base-TX RJ-45 signals to 100BASE-FX 1310nm multimode ST fibre over 2 km

  • TypeData & Communication
  • SizeMaximum frame size of 2048 bytes
  • Converts 10/100Base-TX to 100BASE-FX multimode fibre
  • Extends network reach up to 2 km or 1.2 miles
  • Supports maximum frame size of 2048 bytes
  • Operates at 1310 nm wavelength for reliable transmission
  • RJ-45 copper interface covers 100 m or 328 ft

Media converter mount for Perle C-110-M2St2

This mount is designed to hold the Perle C-110-M2St2 media converter module. It suits network installers who need a secure bracket for converting 10/100Base-TX copper links to 100BASE-FX multimode fibre. The unit supports a maximum frame size of 2048 bytes. It is intended for indoor rack or wall mounting where a compact form factor is required.

Sustained operation over copper and fibre

The converter handles continuous traffic at 10 or 100 Mbps over RJ-45 copper up to 100 m and 100BASE-FX 1310 nm multimode ST fibre up to 2 km. Rate conversion between the two media occurs without buffering limits beyond the 2048-byte frame ceiling. Performance remains steady across the full distance range without throughput degradation.

Distance and frame-size limits of 100BASE-FX

The 100BASE-FX multimode interface reaches 2 km or 1.2 miles, while the copper side stops at 100 m or 328 ft. Frames larger than 2048 bytes are not forwarded, so jumbo-frame environments will see drops. The ST connector and 1310 nm wavelength fix the fibre type to multimode only; single-mode links are not supported.

Highlights

  • Converts 10/100Base-TX to 100BASE-FX multimode fibre
  • Extends network reach up to 2 km or 1.2 miles
  • Supports maximum frame size of 2048 bytes
  • Operates at 1310 nm wavelength for reliable transmission
  • RJ-45 copper interface covers 100 m or 328 ft

Specifications

BrandPERLE SYSTEMS
TypeData & Communication
SizeMaximum frame size of 2048 bytes

Questions about this item

How much power does the C-110-M2St2 draw when running continuously?

The media converter module operates on 10/100Base-TX and 100BASE-FX 1310nm multimode links, so power draw depends on the chassis supplying it.

What chassis or power supply must I already own to install this module?

The C-110-M2St2 is a slide-in module that requires a compatible Perle Media Converter chassis with an available slot and backplane power.

Will this 10/100 module slow down a gigabit switch I keep on the same network?

The module negotiates at 10 or 100 Mbps on the RJ-45 port, so traffic through it stays at that rate while other ports run at their own speeds.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.