We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Perle C-1000Mm-M2Sc2 media converter mount, compact metal bracket

Perle

Perle C-1000Mm-M2Sc2 Media Converter Mount

SKU CH-FF5Y-V39GA

Converts 1000BASE-SX 850 nm multimode to 1000BASE-LX 1310 nm extended multimode over fibre

  • TypeData & Communication
  • Converts 1000BASE-SX to 1000BASE-LX for extended reach
  • Multimode 850 nm input covers 550 m or 1804 ft
  • Extended multimode 1310 nm output reaches 2 km or 6562 ft
  • SC connectors on both sides for direct fiber patching
  • Gigabit fiber-to-fiber media conversion in one module

Mount for Gigabit fiber converter

This bracket secures the Perle C-1000Mm-M2Sc2 module inside a rack or enclosure. It is designed for installers who need to convert between 1000BASE-SX and 1000BASE-LX links in a managed infrastructure.

Passive thermal operation

The mount adds no active cooling and draws no power of its own. The converter module runs within its specified temperature range using ambient airflow, so the assembly stays silent and does not increase the rack's power budget.

Pre-drilled mounting pattern

The supplied hardware matches the module's chassis holes, allowing a tool-free install on standard rails. No additional brackets, cables or software licences are required to complete the physical installation.

Highlights

  • Converts 1000BASE-SX to 1000BASE-LX for extended reach
  • Multimode 850 nm input covers 550 m or 1804 ft
  • Extended multimode 1310 nm output reaches 2 km or 6562 ft
  • SC connectors on both sides for direct fiber patching
  • Gigabit fiber-to-fiber media conversion in one module

Specifications

BrandPERLE SYSTEMS
TypeData & Communication

Questions about this item

How do I mount the C-1000Mm-M2Sc2 converter module in a rack or shelf?

The unit fits standard Perle chassis slots; slide it in until the front latch clicks, then secure the rear retention screw — the step most installers miss is tightening that screw, which prevents vibration disconnects.

What part will need replacement first under continuous operation?

The SC connectors and multimode fibre patch leads are the wear items; repeated mating cycles or tight bend radii degrade the 850 nm and 1310 nm optical interfaces before the converter electronics themselves.

Which distance limit will I hit first on a sustained 1000BASE-SX link?

The 850 nm multimode segment is rated for 550 m or 1804 ft; beyond that the signal drops out even if the 1310 nm extended-multimode side could reach 2 km or 6562 ft.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.