We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Perle C-100-S1Sc40U media converter module in metal housing

Perle

Perle C-100-S1Sc40U media converter mount

SKU CH-VC1X-1JVSQ

A single-strand fiber media converter module linking 100Base-TX to 100Base-BX over 40 km

  • TypeData & Communication
  • Fast Ethernet connectivity up to 100 Mbps over copper
  • Single-strand fiber extends reach to 40 km / 24.9 miles
  • Wavelength pair 1310 nm TX / 1550 nm RX enables bi-directional traffic
  • RJ-45 port supports 100 m / 328 ft twisted-pair runs
  • SC connector ensures secure single-mode fiber termination

Single-strand fibre mount

The Perle C-100-S1Sc40U is a media converter mount designed for network infrastructure. It connects copper Ethernet to single-mode fibre over a single strand. The unit suits installers who need long-distance links in a compact form factor.

Installers needing 40 km reach

This mount suits teams extending LANs across campuses or between buildings where copper distance limits are exceeded. It is not for environments that require multi-strand fibre or shorter-reach multimode connections.

40 km single-mode headroom

The converter handles 100Base-TX over RJ-45 up to 100 m and 100Base-BX over SC single-mode fibre up to 40 km. Wavelengths are 1310 nm TX and 1550 nm RX. Bandwidth caps at 100 Mbps, so gigabit or 10 Gbps needs are not met.

Highlights

  • Fast Ethernet connectivity up to 100 Mbps over copper
  • Single-strand fiber extends reach to 40 km / 24.9 miles
  • Wavelength pair 1310 nm TX / 1550 nm RX enables bi-directional traffic
  • RJ-45 port supports 100 m / 328 ft twisted-pair runs
  • SC connector ensures secure single-mode fiber termination

Specifications

BrandPERLE SYSTEMS
TypeData & Communication

Questions about this item

What must I already have to use the 100Base-BX single-strand SC fiber link?

You need a matching 100Base-BX module that transmits at 1550 nm and receives at 1310 nm, plus a single-mode SC patch cord long enough for the 40 km span.

Can I keep my 100 m copper segment when adding this converter?

Yes, the RJ-45 port supports 100Base-TX up to 100 m, so existing copper cabling stays in place while the fiber side reaches 40 km.

How do I confirm the link is operating at the rated 40 km distance?

Verify both the TX 1310 nm and RX 1550 nm LEDs are solid green and that the copper link LED shows 100 Mbps full-duplex.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.