We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal DIN-rail bracket for Perle industrial media converter

Perle

Perle 05091560 SR-1000-SC05-XT Industrial Media Converter Mount

SKU CH-95AH-1QA6S

Mounts a Gigabit industrial media converter converting 1000Base-T to 1000BASE-SX 850nm multimode over 550 m with extended temperature support from -40 °C to +75 °C

  • TypeData & Communication
  • SizeMaximum frame size of 10,240 bytes
  • Gigabit copper-to-fibre conversion at 1000 Mbps
  • Extended temperature range from -40 °C to +75 °C
  • Multimode SC fibre reach up to 550 metres
  • DIN-rail mount with terminal-block power input
  • Maximum frame size of 10,240 bytes supported

Industrial Gigabit Media Converter

The Perle 05091560 converts 1000Base-T copper links to 1000BASE-SX multimode fibre at 850 nm. It bridges RJ-45 runs of up to 100 m with SC-terminated fibre spans reaching 550 m.

Maximum frame size 10,240 bytes

This unit passes jumbo frames up to 10,240 bytes, so the single specification that decides fit is whether your network stack requires that ceiling. If your application demands larger frames, this converter will not meet the requirement.

Extended temperature range -40 °C to +75 °C

The DIN-rail enclosure operates from -40 °C to +75 °C without active cooling, so thermals are passive and noise is negligible. Power enters through a terminal-block Combicon connector from an external source.

Highlights

  • Gigabit copper-to-fibre conversion at 1000 Mbps
  • Extended temperature range from -40 °C to +75 °C
  • Multimode SC fibre reach up to 550 metres
  • DIN-rail mount with terminal-block power input
  • Maximum frame size of 10,240 bytes supported

Specifications

BrandPERLE SYSTEMS
TypeData & Communication
SizeMaximum frame size of 10,240 bytes

Questions about this item

What does the 1000Base-T to 1000BASE-SX conversion actually do in my network?

It links a copper RJ-45 segment up to 100 m with a multimode fibre segment up to 550 m at 850 nm, letting you bridge the two media at gigabit speed.

How does the SC multimode interface limit the link distance?

The 850 nm SC connector caps the fibre run at 550 m (1804 ft); beyond that you would need single-mode optics or a different converter.

What does the DIN-rail case and terminal-block power connector require for installation?

Mount the unit on a standard DIN rail and feed 40–75 °C rated power through the Combicon terminal block; no internal PSU is included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.