We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular network transceiver with RJ-45 and ST duplex ports, matte metal finish

Perle

Perle 05070314 SFP transceiver 10/100Base-TX 100Base-FX ST duplex 1.24 mile

SKU CH-AAS3-R0GK3 MPN 05070314

A managed Fast Ethernet media converter with RJ-45 copper, console and ST duplex fibre ports extending links up to 1.24 miles

  • Ports1 x RJ-45 Network 1 x RJ-45 RS-232 Console 1 x ST Duplex Net
  • Max Distance1.24 Mile
  • FeatureNetwork Technology:10/100Base-TX 100Base-FX
  • Dimensions0.9' Height x 6.9' Width x 5.7' Depth
  • Connect copper to fibre up to 1.24 mile
  • Manage links via SNMP for full status control
  • Single RJ-45 network port for 10/100Base-TX
  • Console access through RJ-45 RS-232 interface
  • Compact 0.9 x 6.9 x 5.7 inch form factor

Fast Ethernet media converter

The Perle 05070314 is a managed media converter that links 10/100Base-TX copper to 100Base-FX fibre. It provides one RJ-45 network port, one ST duplex fibre port and an RJ-45 RS-232 console port for local management. SNMP support gives administrators full visibility and control over the fibre link.

Extending copper runs over multimode fibre

This unit suits network teams that need to push a Fast Ethernet segment beyond the 100-metre copper limit using existing multimode infrastructure. It is not for environments that require Gigabit or 10-Gigabit throughput, nor for single-mode fibre runs longer than the specified distance.

Maximum fibre reach of 1.24 miles

The converter transports 100 Mbps traffic over multimode fibre up to 1.24 miles, which is the decisive figure when planning link length. If the required span exceeds this distance, a different converter must be chosen.

Highlights

  • Connect copper to fibre up to 1.24 mile
  • Manage links via SNMP for full status control
  • Single RJ-45 network port for 10/100Base-TX
  • Console access through RJ-45 RS-232 interface
  • Compact 0.9 x 6.9 x 5.7 inch form factor

Specifications

BrandPerle
ModelSMI-100-M2ST2
Ports1 x RJ-45 Network
1 x RJ-45 RS-232 Console
1 x ST Duplex Network
Max Distance1.24 Mile
FeatureNetwork Technology:10/100Base-TX
100Base-FX
Dimensions0.9' Height x 6.9' Width x 5.7' Depth
Shipping weight1.23 kg
Package size175 × 145 × 23 mm

Questions about this item

How often will the ST duplex fiber connector need cleaning or replacement?

The ST duplex connector is a passive optical interface; it requires periodic inspection and cleaning with a lint-free swab and isopropyl alcohol, but no scheduled replacement interval is defined by the manufacturer.

What limits sustained throughput on the 100Base-FX link?

The 100Base-FX standard caps the fiber port at 100 Mbps full-duplex, so sustained traffic cannot exceed that rate regardless of cable quality or distance.

How much heat does the module generate when running continuously?

The unit has no active cooling and draws minimal power typical for a Fast Ethernet transceiver, so heat output remains low during all-day operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.