We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact metal media converter with LC fiber ports

Perle

Perle 05060084 S-100Mm-S2Lc40 Media Converter

SKU CH-ZP9S-C6VWD

A Fast Ethernet media converter linking 100BASE-FX 1310 nm multimode LC fiber up to 1.2 miles to 100BASE-EX 1310 nm single-mode LC fiber up to 24.9 miles

  • TypeData & Communication
  • Connects multimode to single-mode fibre over 40 km
  • Extends 100BASE-FX links up to 24.9 miles
  • Operates at 1310 nm wavelength on both ports
  • Uses LC connectors for compact patching
  • Includes USA power cord for immediate deployment

Perle S-100Mm-S2Lc40 Media Converter

This Perle media converter bridges multimode and single-mode fibre networks at Fast Ethernet speeds. It accepts a 100BASE-FX 1310 nm multimode signal on an LC connector and retransmits it as 100Base-EX 1310 nm single-mode on an LC connector. The unit ships with a USA power cord for immediate deployment.

Fast Ethernet distance constraints

The multimode side supports links up to 2 km or 1.2 miles, while the single-mode side extends reach to 40 km or 24.9 miles. Both interfaces operate at 100 Mbps, so throughput is capped at Fast Ethernet rates regardless of fibre type. The fixed 1310 nm wavelength on each port prevents wavelength-flexible architectures.

Multimode to single-mode conversion capacity

The converter comfortably handles campus or metro links where a short multimode run must connect to a long-haul single-mode backbone. It runs out when bandwidth demands exceed 100 Mbps or when the required single-mode span surpasses 40 km. Buyers needing Gigabit or 10 Gigabit fibre conversion cannot use this model.

Highlights

  • Connects multimode to single-mode fibre over 40 km
  • Extends 100BASE-FX links up to 24.9 miles
  • Operates at 1310 nm wavelength on both ports
  • Uses LC connectors for compact patching
  • Includes USA power cord for immediate deployment

Specifications

BrandPERLE SYSTEMS
TypeData & Communication

Questions about this item

Should I pick the 2 km multimode or the 40 km single-mode side for my link?

Choose the 2 km multimode side for campus or building runs up to 1.2 miles and the 40 km single-mode side for metro links up to 24.9 miles.

What does the 100 Mbps rating deliver on an actual fibre run?

The converter passes 100BASE-FX traffic at wire speed across the 1310 nm wavelength with deterministic latency.

Does the LC duplex interface limit the distance to 40 km?

The LC connectors carry both the 2 km multimode and 40 km single-mode signals; distance is set by the optics, not the connector.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.