We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular SFP module with RJ-45 and SC duplex ports, matte metal finish

Perle

Perle 05051410 C-110-M2SC2 SFP transceiver

SKU CH-BEMS-2AY44 MPN 05051410

Converts 10/100 Ethernet to 100Base-FX fibre over 1.24 miles with RJ-45 and SC duplex ports

  • Ports1 x RJ-45 Network 1 x SC Duplex Network
  • Max Distance1.24 Mile
  • FeatureNetwork Technology:10/100Base-TX 100Base-FX
  • Connects copper and fibre networks
  • one RJ-45 and one SC duplex port
  • Extends links up to 1.24 miles
  • 100Base-FX single-mode fibre support
  • Auto-negotiation and link pass-through simplify setup

Perle C-110-M2SC2 transceiver

The Perle C-110-M2SC2 is a media converter module that connects a 10/100Base-TX copper port to a 100Base-FX fibre link. It is designed for network administrators who need to extend Ethernet connections beyond the standard copper distance limit using multimode fibre. The module fits into a high-density Perle Media Converter Chassis for rack-mount deployment.

Installation uses a hot-swappable slot

The transceiver slides into an open bay of a compatible Perle chassis without tools and requires no software configuration on the module itself. Copper cabling plugs into the RJ-45 port while the fibre link uses the SC duplex connector. Misaligned fibre polarity or a missing chassis power supply are the typical issues that prevent the link from coming up.

Distance limited to 1.24 miles over multimode fibre

The 100Base-FX interface supports a maximum reach of 1.24 miles, which suits building-to-building or campus runs but excludes longer metropolitan spans. Bandwidth is fixed at 100 Mbps full duplex, so the module cannot serve gigabit or 10-gigabit backbones. Buyers who need greater distance or higher throughput must choose a different transceiver type.

Highlights

  • Connects copper and fibre networks
  • one RJ-45 and one SC duplex port
  • Extends links up to 1.24 miles
  • 100Base-FX single-mode fibre support
  • Auto-negotiation and link pass-through simplify setup

Specifications

BrandPerle
ModelC-110-M2SC2
Ports1 x RJ-45 Network
1 x SC Duplex Network
Max Distance1.24 Mile
FeatureNetwork Technology:10/100Base-TX
100Base-FX
Shipping weight0.33 kg
Package size25 × 25 × 25 mm

Questions about this item

How can I verify the Perle C-110-M2SC2 is working after installation?

Check that the RJ-45 port negotiates at 10 or 100 Mbps and the SC duplex fibre link shows a solid connection up to 1.24 miles using Link Pass-Through and Far End Fault indicators.

What comes with the 05051410 transceiver and what must I purchase separately?

The module itself is supplied; you must separately provide a Perle high-density Media Converter Chassis, an SC duplex fibre patch cable, and a standard RJ-45 copper patch cord.

Which Perle 10/100 converter version should I choose for multimode fibre up to 1.24 miles?

Select the C-110-M2SC2 model when you need 100Base-FX over multimode fibre with SC duplex connectors at distances up to 1.24 miles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.