We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Perle 05051230 SFP transceiver module with SC duplex port

Perle

Perle 05051230 C-100-S2SC20 SFP transceiver 100Base-LX 12.43 Mile

SKU CH-DGJS-M4NX4 MPN 05051230

100Base-LX SFP transceiver with SC duplex and RJ-45 ports extending links up to 12.43 miles

  • Ports1 x RJ-45 Network 1 x SC Duplex Network
  • Max Distance12.43 Mile
  • FeatureNetwork Technology:10/100Base-TX 100Base-LX
  • Extends network reach up to 12.43 miles over single-mode fiber
  • Single SC duplex port connects directly to fiber cabling
  • Auto-negotiation and auto-MDIX simplify link setup
  • Link pass-through and far-end fault speed troubleshooting
  • Lifetime warranty and free technical support included

Perle C-100-S2SC20 100Base-LX transceiver

The Perle C-100-S2SC20 is a single-port SFP transceiver built for 100Base-LX fibre links. It installs inside a high-density Perle Media Converter Chassis to connect 10/100Base-TX copper equipment to single-mode fibre networks. Network administrators managing campus or metro links use it to extend legacy Fast Ethernet segments beyond copper limits.

Distance and interface constraints

The module reaches 12.43 Mile over a duplex SC single-mode fibre pair. It operates at the 100Base-LX standard, so the line rate is fixed at 100 Mbps full-duplex and cannot negotiate Gigabit speeds. Auto-negotiation and auto-MDIX apply only to the copper RJ-45 side; the fibre port has no speed fallback. Link Pass-Through and Far End Fault help diagnose breaks but do not increase bandwidth.

Chassis and patch-cord checks

Confirm you have a compatible Perle Media Converter Chassis with a free SFP slot before ordering. Verify that your fibre plant uses duplex SC connectors and single-mode cable rated for the required span. Ensure the copper patch cord to the RJ-45 port is Category 5 or better to support 100Base-TX without errors.

Highlights

  • Extends network reach up to 12.43 miles over single-mode fiber
  • Single SC duplex port connects directly to fiber cabling
  • Auto-negotiation and auto-MDIX simplify link setup
  • Link pass-through and far-end fault speed troubleshooting
  • Lifetime warranty and free technical support included

Specifications

BrandPerle
ModelC-100-S2SC20
Ports1 x RJ-45 Network
1 x SC Duplex Network
Max Distance12.43 Mile
FeatureNetwork Technology:10/100Base-TX
100Base-LX
Shipping weight0.33 kg
Package size25 × 25 × 25 mm

Questions about this item

Which distance rating should I pick for a 12.43 Mile link?

Choose the 12.43 Mile variant; it is built for single-mode fiber spans up to that length.

What throughput will I see on a 100Base-LX port in daily use?

The port runs at 100 Mbps full-duplex, so sustained file transfers sit near 100 Mbps.

Does the SC duplex interface limit the 12.43 Mile reach?

No; the SC duplex connector is the standard mating face for the 12.43 Mile single-mode optic.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.