We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular SFP transceiver module with RJ-45 and ST duplex ports, matte metal finish

Perle

Perle 05050714 S-1110-M2ST05 SFP transceiver

SKU CH-98KY-V72QB MPN 05050714

Connects copper and multimode fibre links up to 1804 ft with 10/100/1000Base-T and 1000Base-SX support

  • Ports1 x RJ-45 Network 1 x ST Duplex Network
  • Max Distance1804 ft
  • FeatureNetwork Technology:10/100/1000Base-T 1000Base-SX
  • Connect copper and fibre with one RJ-45 and one ST duplex port
  • Extend links up to 1804 ft over multimode fibre
  • Support 10/100/1000Base-T and 1000Base-SX on a single module
  • Hot-swappable SFP form factor simplifies network upgrades
  • Brand-new Perle transceiver ready for immediate deployment

Perle S-1110-M2ST05 SFP Transceiver

The Perle S-1110-M2ST05 is a copper-to-fibre media converter module built for network administrators extending Ethernet links over multimode fibre. It accepts a standard RJ-45 connection and an ST duplex interface in a single hot-swappable SFP form factor.

Hot-swappable SFP slot with RJ-45 and ST duplex

The module slides into any compatible SFP port on a switch or router, requiring no tools or chassis power-down. It bridges 10/100/1000Base-T copper segments to 1000Base-SX fibre, freeing copper ports for endpoints while extending the link across building backbones.

1804 ft multimode reach at gigabit speed

The transceiver maintains a 1000Base-SX connection up to 1804 ft over multimode fibre, covering typical campus or data-centre runs. Beyond that distance the optical budget is exceeded, so longer spans need a different wavelength or single-mode optics.

Highlights

  • Connect copper and fibre with one RJ-45 and one ST duplex port
  • Extend links up to 1804 ft over multimode fibre
  • Support 10/100/1000Base-T and 1000Base-SX on a single module
  • Hot-swappable SFP form factor simplifies network upgrades
  • Brand-new Perle transceiver ready for immediate deployment

Specifications

BrandPerle
ModelS-1110-M2ST05
Ports1 x RJ-45 Network
1 x ST Duplex Network
Max Distance1804 ft
FeatureNetwork Technology:10/100/1000Base-T
1000Base-SX
Shipping weight0.57 kg
Package size254 × 165 × 70 mm

Questions about this item

How far can the 1000Base-SX link reach with this transceiver?

The 1000Base-SX interface supports a maximum distance of 1804 ft over multimode fibre.

What is the power draw or thermal output when the module runs continuously?

The module draws under 1 W typical and is passive-cooled, so it adds negligible heat to the switch chassis.

Which switch slot and patch cable are required to install the S-1110-M2ST05?

An SFP slot and a duplex ST multimode patch cable are needed for the fibre side; the copper side uses a standard RJ-45 patch lead.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.