We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular network transceiver with one RJ-45 port and one ST duplex port, matte metal finish

Perle

Perle 05050104 SFP transceiver 10/100/1000Base-T 1000Base-SX 1804 ft

SKU CH-GMBN-8AX9T MPN 05050104

Gigabit media converter with one RJ-45 port and one ST duplex fibre port extending links up to 1804 ft

  • Device Typeothers
  • Ports1 x RJ-45 Network 1 x ST Duplex Network
  • Max Distance1804 ft
  • FeatureNetwork Technology:10/100/1000Base-T 1000Base-SX
  • Dimensions1.0' Height x 4.7' Width x 3.1' Depth
  • Extends network reach with 1804 ft fiber link
  • Connects copper and fiber via dual RJ-45 and ST ports
  • Supports 10/100/1000Base-T and 1000Base-SX speeds
  • Compact 1.0 x 4.7 x 3.1 inch form factor fits tight spaces
  • New Perle S-1000-M2ST05 transceiver ready for deployment

Perle S-1000-M2ST05 transceiver

The Perle S-1000-M2ST05 transceiver bridges copper and fibre links in a single module. It supports 10/100/1000Base-T on the RJ-45 side and 1000Base-SX on the ST duplex side. Network managers use it to extend existing Ethernet runs over multimode fibre without replacing legacy switches or servers.

Plug-in installation with distance limits

The module slides into a standard SFP slot and requires no software configuration. The fibre link is rated to 1804 ft on multimode cable; exceeding that distance will cause signal loss. Ensure the ST duplex patch cord matches the 1000Base-SX wavelength and that the copper side negotiates the correct speed and duplex setting.

Gigabit throughput up to 1804 ft

The converter handles full gigabit traffic across the 1804 ft fibre span, preserving the life of non-fibre equipment. Bandwidth headroom ends at the 1000Base-SX physical layer limit; applications needing 10 Gbps or single-mode reach must use a different transceiver. The single RJ-45 port and single ST duplex port provide one copper-to-fibre path only.

Highlights

  • Extends network reach with 1804 ft fiber link
  • Connects copper and fiber via dual RJ-45 and ST ports
  • Supports 10/100/1000Base-T and 1000Base-SX speeds
  • Compact 1.0 x 4.7 x 3.1 inch form factor fits tight spaces
  • New Perle S-1000-M2ST05 transceiver ready for deployment

Specifications

BrandPerle
ModelS-1000-M2ST05
Device Typeothers
Ports1 x RJ-45 Network
1 x ST Duplex Network
Max Distance1804 ft
FeatureNetwork Technology:10/100/1000Base-T
1000Base-SX
Dimensions1.0' Height x 4.7' Width x 3.1' Depth
Shipping weight0.20 kg
Package size119 × 79 × 25 mm

Questions about this item

How can I verify the link is active after installing the S-1000-M2ST05 transceiver?

Check the switch or media converter port LEDs for a steady link light and confirm the negotiated speed shows 1000 Mbps in the management interface.

What comes in the box with the 05050104 and what must I source separately?

The package contains the single transceiver module only; you must supply an RJ-45 patch cord for the copper side and an ST duplex multimode fiber patch cable for the fiber side.

Which version should I choose if my fiber run is 1804 ft and I need 10/100/1000Base-T on copper?

This model supports exactly that distance and copper speed combination, so select the S-1000-M2ST05 when your multimode segment is within 1804 ft.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.